Search:

Hi , i ve got problem with ryobi itek 985. Error e-10 and error e-12 any ideas? I dont have service manual . Can anyone help me?

Hi , i ve got problem with HP 500+, it`s printing everything double. I ve check strip encoder and lubrication Pinch-Arm Mechanism. Carriage belt is ok . Please check attachment for exemple print....

HI, I ve got problem with Xerox WC 7225. Machine is almost dead. Screen is blank(dark) . Panel Led blinking 4-short 1-Long. 8-segment led is showing “u” I try to update software by thy usb and...

I will try set up procedure again and i will let you know

Did you repeat all installation steps again?did you clear any data before?

Brand NEW KM bizhub c280 color copy make blue or red lines,
Print quality is good, b&w copy is good. When i make a color copy the machine makes blue lines or red lines. This is a brand new...

I try to put 64MB ,128, 256 MB SDRAM module, but i stiil got error code CD-231. I have no idea...

Hi I`ve got bizhub c252 and ive bought fk-502 and mount kit unfortunately without extra memory. I try put SDRAM PC133 but i ve got error on the machine . Anyone know correct name DIMM module?

Why Do you want to reset counter?

I still service couple of Ricoh FT series :) I love them. They ve got problems with TD sensor, dirty mirrors and paper transport.

I think that's the problem. The drum has got TD Sensor? Do you know Why drum isn't allowing the toner to enter the unit? The printer try to dose toner into drum unit and it`s ok. Problem is in drum...

Original drum? Maybe they are little different and it1s bad connection?

Any error code? Did you check paper flag? IT can be problem with service station or gear. I ve problem with gear in similar model.

There is no way to reseting toner counter , only by a chip. I`ve send you SM

If you look in service mode - "misc" ===> "display", it will give you the % of the oem drum life (40k). Usually you will get at least 2-300% before it needs to be replaced in a normal...

HI, I need Service manual and parts for Canon IR C3220. I ve got for trade Canon IR C 322o firmware v 85.02 and SST v432. my mail mikon88@o2.pl

SC322: 1st laser synchronization error
-Definition- [B’]
The 1st laser synchronization signal cannot be detected by the main scan
synchronization detector board even if the laser diodes are...

SC 202 is Polygon mirror motor error

The polygon mirror motor unit did
not enter "Ready" status within 20
sec. after the motor was turned on,
or within 20 sec. after the speed of
rotation...

Hi, you can try connect by the external EIO card jetdiret put into the formatter . For example HP Jetdirect 620. On HP website you can download new firmware. Try NVRAM init

Did you clean laser ? All mirrors and polygon motor? Please also check cartridge toner pressure

Why did you replace laser unit? This laser unit has always problem with noisy polygon motor. Few times I try dissembling polygon motor mirror and put some oil in there but no successful for longer...

I try copy ricoh sd card, but no successful. I try copy 1:1 then file to file and nothing. I suppose there a protection file on one of folders. I try and give up.

It could be:

slipping transfer belt or wrong paper registration. Any print quality problem?

Hi. I am technician from Poland. I`ve been working on copiers and printers for last 2 years especially Ricoh mostly all of the range B&W and colour. Now HP copiers and printers. I can help with...