The Panasonic FP1300 was similar. Sliding flatten, clamshell, drive chains, A4R or B4 only, no zoom. 1 control PCB, 1 AC board & 1 DC board. And relays you could tap with a screwdriver to get them...
Type: Posts; User: Rich
The Panasonic FP1300 was similar. Sliding flatten, clamshell, drive chains, A4R or B4 only, no zoom. 1 control PCB, 1 AC board & 1 DC board. And relays you could tap with a screwdriver to get them...
Best copier ever made? The Kyocera Falcon range was good- you could detonate a ton of semtex in one of those and they'd still work. The best ever though has to be a toss up between the Ricoh FT6645...
Anything with an HP badge on it.
What pieces of dung!
Can't repair them coz HP won't allow you to get the replacement parts- a whole device replacement costing £1700+ for a broken plastic feed...
Had a similar problem with an MPC4502 a couple of years ago. 41548
Another Tech had changed some SP modes to stop cold offsetting which increased the warm up time of the fuser from standby.
I've...
Not without visiting the site again and to be honest the security is so tight they won't let me in just to check it.
I think that makes about 20,000 of us!
Apparently the customers IT had seen the issue before but didn't think it was worth sharing the knowledge. Don't you just Love 'em?
Hi everyone.
Thanks for your help on this one. I've resolved the issue by changing the IPMTU setting in service mode (copier > option> network> IPMTU). The default is 10 which means...
Thanks for your help. It really is the last resort with this site and something I have considered. I'm thinking it might have to come to that though.
Cheers
Hi. Thanks for getting back to me.
Yes- all file types are damaged/ corrupt.
Another Canon works fine.
Setting up a file on my laptop and connecting directly to the device works so does...
Hi everyone,
When scanning to email in any file format the attachments either cannot be opened of a message is displayed "file is corrupt or damaged". It doesn't seem to make any...
First of all- are you trying to connect one PC wirelessly and one wired? I think it has to be one or the other- either wired or wireless.-
Secondly- If this is a secondhand device and has the...
I'd go for the springs in the toner assy as mentioned by Zeldaman. Had a couple of these myself- front door can come open during printing as the spring is too weak to hold the cartridge in so the...
Have fitted complete new ITB cleaning unit which has the end seal mod already fitted- same problem.:confused:
Apologies. ITB cleaning unit
Hi there. I have a Charis Pro c5100 which keeps backing up waste toner under the cleaning brush every 2000-3000 pages. The waste auger is clear, there is no blockage in the waste system of any kind,...
Surely Ricoh's MPC 6000/6501 (Venus C2/C3) range has to be in with a shout? :mad:Also known as the hoover killer- need I say more? Biggest POS they've EVER produced and I worked on the 5733 so...
Panasonic FP-C1 has to be up there. Late 1980's digital "colour" box of crap. Forget setting up colour balances coz the customer could change them to something way out then store it as default. Back...
Classic mistake! All clear done and you've now got to re-input the scanner gamma values. It tells you how to do it in the manual. Good Luck. Don't expect to be in and out too quickly tho.:cool:
Evening Gents. Got an HP 6040 giving 59.F0 error (ITB alienation sensor). Motor runs OK, new ITB unit etc. Looks like the alienation sensor but can't find a part no. in the manual. Any ideas? Also,...
The memory DIMM on the formatter causes that. Change it and away you go.
Hi.
Code is 04604008.[
QUOTE=disam;42559]Hi,
we need the Code/password to enter the ServiceMode. Anybody know this?
kind regards
mdisam
:D:D:D:D[/QUOTE]
Had exactly the same problem last week. Customer had found a bottle of 3045 toner at the back of a cupboard so they fitted it. Had to strip the entire toner supply/dev unit, clean all the crap off...
Apologies from all to you and your bunghole. I'm sure there's an ointment to help you get over it. Just follow the instructions and you'll be fine.
Blown fuser lamp. Use the lamp for the MPC 2500 to replace it. More reliable. UK part no. AX44 0275. Update the firmware as there's a fix to reduce the current supplied to the lamp. Done this on 40+...
Eureka! Found the cause. On the rear of the ITB unit, remove the motor and there's a black cover held on with 2 self tapping screws. Behind the cover is a photo-interruptor with an encoder disc. The...