Hi,
No, I ment if there was a possibility to change service settings or something, not rewriting firmware.
Type: Posts; User: Froota
Hi,
No, I ment if there was a possibility to change service settings or something, not rewriting firmware.
Could it be maybe a misaligned document feeder, causing the paper to scratch the slit glass?
It the edge of the paper is constantly bumping into the glass, you also can have problems with lines......
IMO you can disconnect the device from KFS in service mode. after that you can re-connect with KFS.
But KFS is a Kyocera service platform, so I assume it's better to contact Kyocera instead of the...
But this isn't helpfull either......
As you can find the admin login all over the internet, try Admin (username and password)
If not, you can try to login on the device as deviceadmin, and then...
Hi you all,
We installed a Kyocera Taskalfa 6053ci with the folding unit BF-730 on the DF-7110 Finisher. This device came in place for a Konica Minolta with similar options.
Folding without...
Hi,
We have a Sophos firewall with our cloud server behind where our document solution software is running on.
Now we want to connect our own Taskalfa mfp from a local private network to that...
Yes, I could browse it before, but for what stands LP? Logical printer? if so, what benefit does the 4 maps gives to me?
I added one of the 4 lp folders as a networkfolder, and now i can drop and...
Hi guys,
I'm struggling with something I never used before. Customer wants to drop a pdf to a specific folder, and this document should be printed automatically on a Kyocera device.
Apparently...
Isn't it so that you have to put on the option for mail TX and RX via the webadmin?
I think, even if this option to send mails from the device is off, you still can manage your adressbook to put in...
Thx you all for the feedback!
Froota
Hi,
Does someone know if we need extra hardware or licenses if we want to print on AS400 systems from the latest Taskalfa models like the 2553ci?
I'm quit new to the Kyocera's allthough I can...
Hi,
I also tried this out, and it works nice, thx for the advice!
If we need a more standard screen we will just create a full black one or something else, and problem is solved.
The only...
Thank you guys for the quick respons,
I'll keep you posted after I tried this out, many thx!
Froota
Hi,
Don't know if this question already passed, but is there a possibility to personalize the background image of the operation panel for the Taskalfa series, for example the Taskalfa 2553ci?
You...
Idd, Most Mfp's do already have a lot of functionality inside, and sometimes there is extra software available for scanning purposes, but those aren't enough for management purposes.
I was...
The market is evolving and you have to adapt, if not, your boat is going to sink, not only in the printing branch.
The time where you could sell mfp's on high hardware and click prices is over,...
Hi Guys,
I was wondering what software solutions u are using these days for optimization the paper flow on small customer sites.
There are a lot of software apps to use for digitalization, follow...
Hi,
A little feedback on this issue,
I replaced the development motor in combination with the development unit, and no errors so far.
Regards,
Hi,
Thx for the answers, altough I'm also following the manual, so most things were already executed.
Today I replaced the M3 developing motor in combination with the Development unit (and new...
Hi,
Thx for the feedback,
Dipsw 18-7 is a faulty part isolation, correct? Isn't this likely the same as the 99-03, where both functions gives the information if there's a bad sector or not?
I...
Forgot to mention, I replaced the overall control board today, same problem.....:confused:
Hi you all,
Customer called concerning an error message C-D0E1(3) on a Bizhub C1060, with a Fiery controller. My colleague made a data format as the machine doesn't use the 3 HDD's because the use...
Hi Guys,
We have 3 machines on different locations, all Bizhub Pro 1100, with the error C-2802. This code appears especially in the morning after booting the device, and a few times between some...
Konica has to test their machines a bit better.....
We also have troubles on the new C458/558/658 serie, such as broken exit unit drives due to new functions, internal faults, etc.
It remindes me...
Hi,
Remote panel on a Konica Minolta is working fine, but there are some things you have to change.
CE password has to be enabled. (set to ON)
After this you can find the option 'remote...