Search:

Type: Posts; User: MrBafner

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    1,238

    Re: Xerox 700i drum marks scratch

    I replaced the magenta dev unit and drum and the problem went away. I did change drums first ... the problem stayed on the magenta, it was the new developer unit I installed, must have been a bad...
  2. Replies
    4
    Views
    1,362

    Xerox 700 093-315

    I managed to fix the scratch issue on the image .. it was a bit of toner on the black shelf / panel under the black / cyan drums/developer unit.

    However now, I am getting 093-315 .. I have...
  3. Replies
    6
    Views
    1,238

    Re: Xerox 700i drum marks scratch

    Thank you ... good advice, will get some IPA and try it out. Just cleaning the wiper didn't help at all.
  4. Replies
    6
    Views
    1,238

    Xerox 700i drum marks scratch

    Last week I had an issue with black, ended up lifting the top of the machine and cleaning the ROS, the black is now printing fine.

    Now I have a problem with the magenta image streaking .. changed...
  5. Replies
    8
    Views
    1,368

    Re: Dark Lines in Black only

    Thankyou so much for the reply. Have cleaned the laser .. you think I should replace the laser?

    Have put in a brand new developer units, I was certain that was the problem.

    Only other thing...
  6. Replies
    4
    Views
    2,094

    Re: Xerox 700!i GRINDING HELP

    Most gear grinding noises come from drums or developer assembly's .. occasional tray 5 and the odd occasion is the 2nd btr
  7. Replies
    1
    Views
    1,146

    Service manual for Xerox 700i

    Hi there,
    Can someone please send me a service manual for the Xerox 700i ?

    Much appreciated and thank you
  8. Replies
    8
    Views
    1,368

    Re: Dark Lines in Black only

    Did it fix the problem when you changed the 2nd BTR ?

    I'm having a very similar issue, but my image is fading in the center and darker on both sides. Have done the exact procedure you have done...
  9. Re: Black Imaging Problem Xerox 700i - Urgent help please

    No, I don't have PWS :(
  10. Re: Black Imaging Problem Xerox 700i - Urgent help please

    Have cleaned the 1st btr roller and the 2nd btr unit .. didn't make any improvements at all.

    Only thing that I can think of was to clean the laser and even though it was so hard to get to, it too...
  11. Replies
    3
    Views
    1,004

    Re: C8055 and ITB belt moaning noise.

    I am not familiar with Altalink C8055, but on the commercial machines that I have worked on I found that sometimes the ITB cleaning assembly needs to be reset or replaced. You can clean them manually...
  12. Re: Black Imaging Problem Xerox 700i - Urgent help please

    I am going to try another developer (ROS) unit ... I only have 1 bag of black developer left.
  13. Black Imaging Problem Xerox 700i - Urgent help please

    Have this imaging problem with black ... have replaced the toner, drum, dev unit, ibt belt and still having imaging issues.

    The edges print heaps darker and the center terrible.


    50951

    When...
  14. Replies
    0
    Views
    502

    Old Printer Drivers

    Does anyone know of any reliable sites that still has old Xerox printer drivers. I have spent hours looking and have tried several other drivers to no avail.

    DocuColor 5065
    DocuCentre 6500-III...
  15. Replies
    0
    Views
    431

    xerox 700 colour match

    If I print out the swatch colour sheet I get the colour that I'm trying to print.

    If I select that swatch colour box and place it as a background colour box it prints as though it is faded and...
  16. Replies
    1
    Views
    1,564

    Wanted Xerox 700 Paper Tray

    Am after the part number for a tray 1 and tray 2 paper tray for a xerox 700i please.

    Tray 1 has a snapped off arm and tray 2 just errors to 072-210 and won't function.
  17. [Misc] Re: Xerox Docu Color 252 - Cyan Shades on page edge and Black impression repeating

    Looks like you need a new drum or dev unit.
  18. Replies
    8
    Views
    3,661

    Re: Xerox 700 093-315 error

    NVM 762-313 cleared the error, reset it to 0

    This is the NVM of the Xerox 250
  19. Replies
    8
    Views
    3,661

    Re: Xerox 700 093-315 error

    I have changed the following :-

    * A new drum
    * A new dev unit
    * A new magenta toner motor

    Still have the error displayed 093-315
  20. Replies
    8
    Views
    3,661

    Xerox 700 093-315 error

    The error is 093-315 and I can only find the NVM for the J75, not the 700.

    Can anyone give me the NVM for the 700 please ?

    I have NVM 762-317, but it doesn't clear the error.
  21. Replies
    24
    Views
    3,409

    Re: No black developer Xerox 700

    I replaced the entire toner distribution tray with one that was in a Xerox 5580. I had to remove all the caps from the toner cartridges to get them in.
    Topped up the developer powder in the dev...
  22. Replies
    3
    Views
    455

    Re: Messy 2nd BTR - C75

    Do you just clean the roller or the entire 2nd BTR unit ?

    There is a tray in the 2nd BTR that has a build up of toner. You need to get in with a vacuum and clean it all out.
  23. Replies
    24
    Views
    3,409

    Re: No black developer Xerox 700

    OMG .. went through the sequence again, of course I never replaced the dispense motor, nor the board this time.

    I cleaned the developer unit and reloaded.

    Made sure the NVM 762-315 to 0...
  24. Replies
    24
    Views
    3,409

    Re: No black developer Xerox 700

    Yes .. after doing it 3 times it is noticeable that toner is being dispensed.
  25. Replies
    24
    Views
    3,409

    Re: No black developer Xerox 700

    Yes, both made the same hmmmm with a motion noise. Both toners are full.
Results 1 to 25 of 61
Page 1 of 3 1 2 3