Sorry about that. When I copied it in, it did not work right. I will try that again.
504-302NR02520
505-302HN21450
515-302NR02440
516-302NR02470
517-302NR02510
518-302NR02700...
Type: Posts; User: lees
Sorry about that. When I copied it in, it did not work right. I will try that again.
504-302NR02520
505-302HN21450
515-302NR02440
516-302NR02470
517-302NR02510
518-302NR02700...
Here is a list of some of the 500 numbers for that page of the manual. Sorry I don't have descriptions for them, but you can get that when you make an order with Kyocera. Hope this helps you and...
Sounds like you also unplugged the connector to the scanner motor to cause the 3100 error. Try plugging it back in but leave the document processor unplugged and see what happens. I don't...
I looked back at some old records of this error code and found some interesting things. One thing that we had several times with the 0800 error is wiring harness and connections to the document...
Make sure you installed the correct parts. The maintenance kit should be the MK3302. The drum number should be the DK3192. If the drum installed is the DK3172, it is for the 3145 and will probably...
It seems kind of funny, I just got that part number for someone the other day from Kyocera. I also got # 505. If anyone needs them, they are
505 - 302TP28020
516 - 3V2LV28120
I also have a...
Had this same issue on the same model a few years ago. After a lot of trial and error, I had the phone guy come in and he monitored the call from one of the places that the faxes would not receive. ...
Completely agree with Ropariva above. Have seen this many times. Clean the cavity any time you work on these machines and it will save you service calls. This will cause intermittent 0511 jams and...
Replace the fuser drive assy part # 302RV94021. That should solve the issue.
Here is some information that I added to our parts manual that I received from Kyocera. This should give you the part number needed for the front or rear catch. Hope this helps.
303HL07161 Front...
With that many prints on the machine, replace the registration actuator. I have not seen this cause the problem you are having, but it will cause intermittent jamming starting sometimes around...
Operators guide gives the sequences for the lights to determine the error code. You will have to use that to figure out the error. Good luck.
I agree with darry. Make sure the phone line is a 2 line cord. I had a 3145 that would only receive from certain locations and not from others. I had the phone company come in and check the line. ...
Open and close the rear door and the waste toner door. If either one of these is not closed properly, the machine will recognize the add toner before the open door. Open and close all doors and...
I agree with Rebel above. Open and close the rear door. I have also had one machine that the waste toner door had to be opened and closed. I suggest opening and closing all doors. If this does...
We have replaced hundreds of these fusers for this reason. Replace the fuser and the issue will be resolved just as others have posted. If you don't have a fuser handy, many times you can put the...
Believe it or not, a firmware update has solved this issue for us many times. Hope it will help with this one.
Fuser is not hard to replace in that model. Corner covers on both sides of the rear of the machine will have to come off. Remove the rear door, and four screws hold the fuser in. There is one...
The 01 series does not show a U287 in the manual, but on the 02 series I was able to reset this code using U287. Be sure to go back in and turn it off when you finish. This will reset many codes...
We have also had a lot of problems with 4803 errors using office 365. What we found is to go to the Command Center > security settings > Network security. Uncheck SSL3.0/TLS1.0 and TLS1.1 in the...
Attached is a bulletin on this issue. Replace the black drum only with a DK5140A. Make sure to order the A version for the black slot.
5034450344503445034450344
I got my 508 fixed. It turned out to be the toner supply assy. The auger in this unit was not turning. This is not a job you want to do in the customers office because the machine has to be almost...
I am working on a 508ci now that is doing the same thing on yellow and magenta. I have found that the auger that takes the toner from the toner cartridge to the developer unit is not turning. There...
I had the issue with the envelope motor turning all the time on a M3655. This turned out to be an EEPROM. Once that was replaced everything worked fine. Had to go through Kyocera and replace...
We have seen both of these issues. We have changed many cassette guides over the years on the various models. We have also seen the registration actuator wear and cause intermittent jams. This can...