Thank you for the information. Since that post I started using Paint. It's on my computer and its free.
Also, I have retired from the biz and live in Northeastern Az. Four seasons, a small...
Type: Posts; User: Desert Rat
Thank you for the information. Since that post I started using Paint. It's on my computer and its free.
Also, I have retired from the biz and live in Northeastern Az. Four seasons, a small...
Is this model new enough to connect to an Apple system through the USB port? Or is there a special nic card that is needed.
I was just wondering before I make the sale.
DR
Slimslob,
Let the libs set themselves up on this page. It probably gets looked at the most and we all need a good chuckle?
;)
DR
:o
Sorry to be so long in posting the fix for this problem. Copier tech and Brian gave me the solution. It was those little
sponge rubber pads behind the diverter. If it sits over night they...
copier tech and Brian,
Thank for the fast reply. I forget about those little things. I have run across that a couple of times on Canon machines.
I will definitely check out those pads.
Thanks...
This customer uses tray 1 most of the time. I have replaced the feed & sep rollers for all trays as they were needed. But the call came back.
I have checked the idler rollers in the paper path for...
Kiran and Blackcat,
The problem is solved.:) It was that loose connector I mentioned. This is the first time I've worked on this model. So I usually
take pictures of connectors and stuff to...
The New Priest
The new priest at his first mass was so nervous he could hardly speak. So, before his second week, he asked his monseigneur
how he could relax. The monseigneur told him to...
Kiran,
Thank you for that clarification and don't worry your not alone. I'm right with you.
DR
Kiran, there is only a touch screen and the power button. I will check that in the book.
I haven't throughly read that section of the book yet but will tonight.
DR
Blackcat, Thank you for your input. I am going over tomorrow to run the diagnostics. I am sure I replaced the service station and double checked
the installation directions in the book after it...
Nope,
Try looking at Service-Manual.net , they may have it.
Only $12.99 for the 7830 family .
Good luck
DR
TRUST
There comes a time when a woman just has to trust her husband.
For example...
A wife comes home late at night from work and quietly opens the door to her
bedroom. From under the...
:confused:
Well, I replaced the service station and still get the 21:13 code. I re-read Kirans post about getting into the service menu after I got back to my office.
Should of looked at it before...
Kiran Otter,
Thank you for your quick reply and confirmation of my diagnosis. I intend to take your advice and replace the belt too.
After fishing most of the summer I need to be nit picked, so...
Looking through the book, if I'm reading this right, it indicates the ink service station (ISS). I removed the right hand cover to see if there
was any movement of the ISS and there was none. The...
wjurls,
Thanks for your reply. After re-reading my post I see I was not clear on the fuser rollers. They are new OEM rollers. I know they will only work
in the C500 and I forgot about the force...
A customer of mine had a c500 pm kit and wanted to know if any of these parts would fit his BH Pro C5501.
I searched the part numbers in the 5501 parts manual and got no matches. But a lot of these...
Thanks again Brian, I will check it out.
DR
Brian,
Thank you for that insight. Does it just stop working or does it chew up a gear or burn the motor up?
I don't hear any odd noise that a gear makes when the teeth skip across each other?
...
The M and C drums are dirty and about 2/3rd of life. The t-belt is at 127% of life. May be I'm chasing my tail here.
This is my second call for this problem. The first time out it only had the...
Glad to hear this info was helpful. I remember this call, another one where the sensors worked but were out of sequence.
DR:)
As of now I have not heard back from the IT tech. If he has any questions I will direct him to this post, it contains
some good suggestions on how to deal with this issue.
Thank you everyone for...
Thank you everyone for the quick replies.
Mr. Magic, thank you for the link, I'm sure it will come in handy for this model.
copier tech, no it is not just one doc to my knowledge. I'm not sure...
It seemed OK when it was hooked up to their network but they say for the last month it seems
slow to print from their computers.
I am not an IT tech so please use simple terms.
They say they got...