I also would like to know. Been trying for years for this.
I've tried with some machine that already have plug in...
plug in IC reader A, IC reader B, IC reader D. But still the same error comes...
Type: Posts; User: shinchan
I also would like to know. Been trying for years for this.
I've tried with some machine that already have plug in...
plug in IC reader A, IC reader B, IC reader D. But still the same error comes...
looks like transfer belt cleaning blade need to be replaced.... You got cyan, magenta, black streak in one line.... thats the transfer belt area not cleaning in my opinion
try replacing the drum first... swap it to another machine and see whether the problem persists
have you cleaned the transparent plastic of the waste toner container?
It's located on the bottom part of the waste toner container.
Common network mistakes:
1. User changed router, the IP address changes.
2. Someone moved the machine, ejected the LAN cable and forgot to plug it in.
3. Double IP address. One of the device...
so you are saying that the machine is 220V... but the fuser version is 110V ?
if so, change the fuser to 220 V version
I'm a Small business owner, renting around 40+ fuji xerox machine. I'm using print tracker and fuji xerox built in reporting.
Print tracker offers free trial.
replace chip with compatible chips. no reset/reseter
have you check the rubber roller inside the IBT Belt?
look. There is no Fuji Xerox Workcentre 7855
There is Xerox Workcentre 7855. Make sure your chip is this model. region also depend on the machine.
fuji xerox equivalent of 7855 is fuji xerox...
misalignment troubleshooting:
1. Check IBT belt, whether it can rotate smoothly. Does it have rubber on the sides? if there is, does the rubber already failing and dropping to the drum?
2. Check...
010-382
fuser thermostat fail
Original fuser? or compatible fuser film?
do you have service manual to trade?
I have parts and service manual for DocuCentre-IV 3065 and I'm looking for Docucentre VI C3371/C5571 or Docucentre V 5070 OR Docucentre V 2560.
this... or you could have a broken exit sensor. Please check
60070
are you using original toner? or compatible toner?
if you are using compatible toner like me, then most likely the developer has ran out.
solution: replace the developer.
below the PICKUP rollers, there is a black chute.
There are 4 screws holding the black chute.
in this black chute, there are 6 sensors. 3 on top, 3 on the bottom.
Overtime, the sensor sponge will...
thank you very much.
I can confirm that replacing Power Save PWB is the solution. ;)
today's work:
7. Swap Exit PWB.
8. I traced the left cover switch cable (orange), everything is intact. Tested both side with multimeter, connectivity is fine.
9. I traced the exit sensor cable,...
got sample?
swap the drum. example, swap cyan to magenta, see if the problem change in magenta.
if it does, the drum cartridge is defective. Usually the padding under the drum is dirty with IBT...
I've encountered this. But no solution so far.
What I've done:
1. Swap and replace left interlock switch.
2. Swap left cover
3. Swap ESS
4. Swap MCU
5. Swap Fuser
6. Replace Exit sensor
so what's the result?
my first guess is also Cyan Drum. because the weird marking color is cyan...
IMHO. This is still fine. Copying color document / photo will result in degrading quality. you can play some options in the image quality / text type such as Photo, presentation. Maybe it can help
altalink B8045 ? or color?
original developer? or compatible developer?
turn on shadow suppresion during copy and scan color.
IIRC it's under , Image quality>effects > shadow suppresion
if you print the original file, the result is clear right no blue background?
can you successfully scan to email?
1. go to CWIS... (type your xerox IP on your browser)
2. enter user and password if asked
3. go to properties tab
4. on the left hand side, iirc click...