thanks
Type: Posts; User: Transam1
thanks
I have a machine that requires a new hdd does anyone know
if i need to order from ricoh -Expensive or a comparable laptop hdd will work
Thanks
Gary
Have replaced exit flag assm still randomly jams and says jam in fuser
jam is found behind door A any ideas
Thanks
Gary
Does anyone know if i order a new SD card for the MP 4002
does it come with the firmware one it
Thanks
thats a big help
where might i find the firmware for this i have no support from ricoh
Thanks
Gary
changed controller board that error is gone but now have 2 new ones
627-00 and 819-00
any ideas ?
removed hdd made no diff will not come to ready so do you think
it s the board like manual says?
ok thankyou
procedure no good same result
noticed in lower feft corner says hdd error does this mean i need to replace the hard drive
[QUOTE=francisco;739937]
thankyou
do you happin to have the procedure for this
Thankyou
Gary
I have a machine with code 878-01
customer is not using a flash drive ricoh manual says replace main
controller
anyone have any other solutions?
Thanks Gary
I have a customer with a xerox 9301 with error 0f 099 059
Anyone have an idea what this means and how to clear it
Thanks
does anyone know how to reset the maint message on a ricoh sp 4500 after replacing the maint kit
Thanks
Gary
I have a ricoh 3045 add toner light would not go out dev looked very grey changed dev ran set up copies nice and dark
cust called 2 weeks later copie s light exchanged with a dev unit from a working...
Machine will do 8.5X11
11X17 but not 8.5 X 14 it stops in the same place every time
checked settings it is on auto detect tryed it set on 8.5X14 still stops in the same place
any ideas ? this is...
running windows 10 machine spools for 5-7 min when printing a pdf job
any ideas ?
I have a xerox 7830 which customer has forgotten admin password
need to do a reset but need the product enablement feature code
anyone know where i can get this or another way to reset the admin...
I have an mx 811 and when the tray is empty it won t stop trying to lift just hammers away
if you put 1 page of paper it will lift and stop changed tray with another machine no difference
changed...
Thanks I will have a look
I have a Ricoh mp 2851 with the optional 2 tray paperbank
have replaced the pick up roller and clutch still occassionally
says paper jam open side door and remove jam
when you open door there is...
recently tradedin a xerox wc 7120 when turned on
all leds on key panel flash 5 times then repeats does anyone know what this means ?
Thanks i will check
I have an mp 6000 first copy or print out is blurry down 1 side but all following are ok
this happins when coming out of sleep mode.