Search:

Type: Posts; User: encorelaser@comcast.net

Page 1 of 3 1 2 3

Search: Search took 0.03 seconds.

  1. HP M604 1500 Sheet Paper Tray Part

    I have an HP M604 with a broken gear on the 1500 sheet paper tray. It is the gear that the feed roller (the roller in the back with a gear) matches with. It looks like I need to change the feeder...
  2. Replies
    0
    Views
    214

    Canon IRA C2225 ADF Jams

    I am getting document jams at the exit and the document is about halfway out of the output tray. I get a code of 010050. Also, sometimes it gives an error when you insert the document into the input...
  3. Lexmark T640 Operator Panel Replacement

    Is there any way to reset/adjust the printer in order to be able to install a good used control panel PN 40x0195?
  4. HP LaserJet CP3505 error 13.20.00 Solved

    The fuser assy. has the jam actuator/rod/flag that trips the light sensor (
    Photo Interrupter)
    mounted on the left side of the fuser. Sensor tabs break off and the sensor falls off and interferes...
  5. Panasonic DP C213 Transfer Belt

    Panasonic C213 has a message that transfer belt needs replacemnet. I replaced this belt once a long time ago on this copier. My question is, will the machine eventually shut down if the transer belt...
  6. Re: estudio 477 sl "toner sensor error"

    Well then, I am going to try a new drum unit before replacing the contact sensor.;)
  7. Re: estudio 477 sl "toner sensor error"

    Apparantly this is a know problem. There is a bulletin that addresses this problem. The bulletin includes a part number for the toner contact sensor in the machine and basic instructions on how to...
  8. Re: Estudio 4508A radf document jams and parts

    Update. I was finally able to access the parts, so I got part numbers now. :D
  9. Estudio 4508A radf document jams and parts

    I have a relatively new 4508A with document feeder jams. The machine has only 44,215 pages and 43,409 scans. I cleaned the document feed rollers and it helped for a few days then the problem...
  10. Samsung SCX-6555 Dropping Network Connection

    I have a 6555 that has being dropping out of the network intermittently. When it stops working the amber light at the RJ45 at the machine goes off, the green light is on. I have plugged the network...
  11. External monitor for e-STUDIO 4508A?

    One of my customers asked if you can hook up an external display monitor to their e-STUDIO 4508A. I know there are foreign interfaces to add coin machines, etc. but I have never heard of being able...
  12. Re: Upgrading Toshiba e-Studio 506 to Toshiba 4508

    There are 10 templates. Where can I find the eBX Convertor Tool?
  13. Replies
    9
    Views
    3,001

    Re: Fax test number!?

    Brother has an automated fax number for sending and automated receive. 1-877-268-9575.
  14. Upgrading Toshiba e-Studio 506 to Toshiba 4508

    I am replacing a Toshiba 506 with a new 4508. I have all the users set up on the server for scanning to SMB. Do you think it would be possible to do a backup of the data on the web page of the 506...
  15. MX-C401 Not Powering on/Blank Display

    I have a MX-C401 that comes on with main power (makes noise) but when turning on console power the display does not come on. It is not a display problem because the machine does not complete the...
  16. [CQ] Canon IC MF6500 Series Blank Copies from ADF

    Now that these machines are getting older, I am starting to see this problem more and more. I get intermittent blank copies only while using the ADF. The ADF is not missfeeding or double sheet...
  17. Re: Brother Machines Using TN-750 Toner

    Hi Tech28, thanks for the heads up but I could only find the lower pressure roller for HL-5440 and not the upper heat roller. Do you have Amazon's item numbers/part numbers for both rollers?
  18. Re: Brother Machines Using TN-750 Toner

    I did a Google search for the fuser and don't remember Amazon coming up. I will try searching on Amazon directly. Thanks!
  19. Re: Brother Machines Using TN-750 Toner

    This is true, but I have older Brother machines in the field that the fusers have lasted a lot longer. I find that the series of machines that I listed on my original post have fusers that fail...
  20. Brother Machines Using TN-750 Toner

    Is anyone out there having as much trouble with the fusers on these machines as I am? Some of the machines that use this fuser are the DCP-8110, HL-5440, MFC-8950, etc. The fuser part number is...
  21. Toshiba e-Studio 3508A Customer Quote

    I am putting a quote together for a customer on a new Toshiba e-Studio 3508A. This is one of Toshiba's new machines that just came out recently. The MSRP for the base machine (35 Pages per Minute,...
  22. Replies
    15
    Views
    2,967

    Re: MAGENTA out of focus

    Hi, I had a similar issue on an HP CLJ 4700. Tech support suggested a new magenta lsu but it ended up being the ITB. Good luck, hope that helps.
  23. Re: Canon IRA C2225 ITB Replacement

    Got it! Thanks so much for the input.
  24. Re: Canon IRA C2020 Service Manual

    Thanks so much! This is going to come in handy.
  25. Re: Canon IRA C2225 ITB Replacement

    Thanks a lot for the heads up on the blue handles. I figured that I needed to pull it out with those handles but I did not want to mess things up without knowing for sure. Again, thanks.
Results 1 to 25 of 63
Page 1 of 3 1 2 3