Search:

sorry to dig up an old thread but I am having this exact same problem

I was running version 1 Windows XP and the drive died so I have installed a new drive but the only version of IC413 is the win...

do you know if there is a patch or an update to run the win7 version?

I would really appreciate that, I am dead in the water right now

I finally got the ISO's downloaded and have installed, these are actually win7 not XP like I had on it before so still not sure if I have the right versions

That being said I have gone through the...

it has E100-0S on the box which I think is IC 413

it was running XP before the drive decided to crap itself

Hi All

I need to reinstall the fiery OS on a C6000 machine and someone was nice enough to PM me a link a while ago but the download is horribly slow, currently saying it is going to take 24 hours...

thanks for your reply

I ended up getting this fixed today, it ended up being the paper feed motor after all

I tested it many times under the IO and it was completely functional so I ruled it...

thanks for your reply

I went through it again today but still no luck

I have another C6500 machine that I pulled those gears off from behind the conveyance board and swapped them over as you...

Hi All

I am struggling with a C-0101 error on a c6000, the machine starts up fine, the error only appears when you try and print.

confirmed paper feed motor is running fine from the IO command...

Thanks for your reply

Yes, I have been using remote desktop to connect to it but it is freezing during bootup so hard to tell what is going on

I am pretty sure these are IC-413 controllers, it...

Hi All,

I have a C6000 running a System 9 Fiery and the drive started to produce paging errors in the event log and was lagging and taking forever to process a job, I have pulled the drive and...

Yes that did it, thanks heaps for that..

I must have gone though the DIPSW list 4 or 5 times but as it referred to it as the MB-504 instead of bypass I missed it

thanks again

cant login there any more, been retired for almost 10 years

thanks for your reply

where can I find the instillation manual for the bypass tray?

Hi All,

we have a c6000 machine without a bypass tray and also an older (Spares machine) c6500 with a bypass tray, I have removed the everything from the c6500 and installed on the c6000 but the...

That did the trick, thanks for that
I was concentrating so hard on trying to send a print job in test mode that I didnt even think of looking for that option, cheers

yes, good thinking that would get me by I think, I will see if I can find it

Hi All

I have a c6000 machine that is throwing up C-4501 through to C-4503 on startup and auto color reg, the machine is producing more than adequate prints in test print mode for the current job...

This issue is back again, both machines have been fine for the last couple of weeks and today same deal

Both of them just keep dumping yellow toner, if it errors out and I open it up the drum and...

I havent checked the exact counts yet but one would only be half way between cycles and the other would be 2/3 the way through a 200k pm cycle

Both running OEM toners and drums

is it possible...

Hi All

This morning to my total dismay both of our machines (a c6000 and a c6500) are coming up with a c2451 error

I have had this from time to time on the c6500 but only ever once on the c6000...

Hi Guys I have a C6500 machine that will not print SRA3 sheets from either tray4 or Tray5, as soon as I send a print request it shows up Tray4 (or 5) Dehumidifying Please Wait and no matter how long...

Actually we got to the bottom of it this morning, as it turns out it was simply the connector for the vertical paper sensor on the PRCB, it was slightly out on one end which was not allowing the...

Thanks for your reply

All the clutches on the ADU are functioning fine, all the motors on the ADU are fine and also the paper feed motor that drives the entrance rollers on the ADU is also working...

Hi All


Wondering if I can get a little help

I have a C6500 Machine that jams at the entrance of the ADU, it seems to run thin A4S sheets ok through tray 1 but anything bigger or heavier it...