Sent both files with file service "We Transfer".
Copy just the .tar files onto jump drive.
Type: Posts; User: copyman
Sent both files with file service "We Transfer".
Copy just the .tar files onto jump drive.
Agree there wasn't much detail with the attached bulletin and I don't know the "i" series that well, this is why I told OP to that it has been discussed on this forum so he could seach posts for more...
There have been issues with the "i" series fuser discussed on this forum.
There is a new style fuser so if you order one make sure it's new style (see attached bulletin)
PM me your email and will send
Thanks for the replies, turns out it was the soft switch setting as suggested.
Just a thought but are you using genuine HP toner carts? I've seen these models not work after firmware update and using aftermarket toners. HP has added a block of aftermarket toners to their...
Ouch! That is strange. I would put printer on a surge / noise suppressor. Or they sell monitor that you leave plugged into same outlet and see if line voltage is issue. Hope you aren't paying for all...
After updating FW to X4 and installing movie data now the config page has "Generic 36C-9" at top. Looking at config page from wholesaler it was normal with Kon/Min at top when I got the machine. I...
Is there a way to see what LK's are installed?
Can the home screen be set to classic style permanently?
Thanks for letting me know about inbox. I emptied and should be good now.
Thanks again!
Hey I speak every language, it's called Google Translator:rolleyes:
Just bought this off lease machine and this message is showing, "The PDF / A font was not found. Please contact Service rep" Does this mean it has a License kit, if so which LK and how to get rid of...
I've had this many times. If the rear latch hook on top cover isn't broken then the rear hinge pin for top cover has come out. Remove rear cover and look where the top cover hinges and you will see...
Can you let us know the supplier? If not comfortable with posting in public can you PM me with the supplier name so I dont order PCR's from them. Also I could provide USA supplier I use for all the...
Agree about trying a different supplier. I've been rebuilding the "8" series drum units for several years now without any real issues. I always replace the drum, cleaning blade, PCR, pcr cleaning...
Are you talking about toner or image unit chips? This thread is about image unit chips so confused. Are you saying the chips are shorting out and literlly burnt? I worked on many of those back in the...
Transfer belt. You can try and remove trans belt unit, remove cleaning assembly on unit, vac & clean blade, lube blade with yellow toner and reinstall. If that don't work you need to replace transfer...
With Konica Minolta "i" series and all the issues, after unpacking you get on your knees and pray machine will even work:rolleyes:
That's why I suggested getting the serv manual because there are step by step intructions on how to disassemble the paper feed units & manual feed tray.
It's one thing for the Chinese to screw us but to not even use lube really hurts!:rolleyes:
First just so you know this site isn't live or monitored. Sometimes may get lucky and a tech is online. But this site shouldn't be used for onsite assistance.
Now as for your C550. As you are...
Thanks for checking manual. I also looked and didn't see anything. Does it make sense that Kon/Min suggested replacing the NVRAM?
Thanks for that info. After I went to the "thread" you suggested and read the posts something else came to mind that wholesaler was told by Kon/Min tech support and why I think they were stumped,...
I knew this would happen since I've been bashing the "i" series on this forum with all the issues they have .
Have a customer with a C450i and they want another one. A wholesaler I buy from in...
Good tip. Forgot about this.