5 to 10 mm from each tray... Same thing with 480mm paper
Inviato dal mio SM-S901B utilizzando Tapatalk
Type: Posts; User: Codex
5 to 10 mm from each tray... Same thing with 480mm paper
Inviato dal mio SM-S901B utilizzando Tapatalk
I checked this part in our machine.. And everything seems to be ok... I followed the allignment procedure with the pivot allignment tool... But have a skewed immage...
Inviato dal mio SM-S901B...
Have the same issue.... Never solved
Inviato dal mio SM-S901B utilizzando Tapatalk
i use a Windows 10 driver for all the Win 7 machines and it works without problems...
If you have another MPC3002 you can restore the data from there, changing the serial number (gives sc995 the first time you turn the machine on).
If not, your machine should work anyway, the...
Hello
Why you have to erase the memory?... If you mean the personal information you can format the HDD. It's not a good idea to make a "memory clear"
Inviato dal mio SM-S901B utilizzando Tapatalk
It's not an EX?
Inviato dal mio SM-S901B utilizzando Tapatalk
Had similar issues... Need PS3 card to print in color.. Otherwise only B/w print
Inviato dal mio SM-S901B utilizzando Tapatalk
Check the the duplex unit (the part above the fuser unit), sometimes a sheet stucks there and it's difficult to see
Inviato dal mio SM-S901B utilizzando Tapatalk
Hello
What means "in the area in fuser C"?... Is the paper in the fuser? After the fuser?... Before the fuser?
Inviato dal mio SM-S901B utilizzando Tapatalk
I experienced the most problems with the MAC network name... If you check the name in the IOS settings... You'll see for example "toms Imac"... But if you check from a windows PC you see "IMAC2"......
In my experience (this morning for example we configured scan2folder in 15 pc's with win 10...and 11) without any problem. If the machine have no smb 2 or 3 you can update Firmware.... Or enable smb...
Hy if the machine bave a SOP it's like normal windows sharing, make sure to use the correct name for the mac... You can check how a windows pc sees your mac on the network. I experienced problems...
[QUOTE=tullio; 2583255]Va bene. Farò questi test. Vi aggiornerò. Grazie. [/CITAZIONE]
There is a RTB for this issue, faulty PCu units causing dust on the led array.Check the Pcu , where the serial...
Hello
Try to increase the Print ready temp. Clean the thermopile and check thermistors, it's easy to mount the thermistors upside down (had this once, the customer tried "do it yourself")
Is the...
Try to invert the connectors... Had this issue twice... Once it was a dirty SCSI card, and the second time i swapled the connectors
Inviato dal mio SM-S901B utilizzando Tapatalk
As slimslob said... It can be a problem on the toner Level sensor... You can try an input check to see if the sensor works. Or you can open the tpner hopper, remove the toner inside and reassemble...
Hello
Do you use OEM toner and developer?... We have still some Mp6000 on the field, i had some issues with the magnetic rollers, or the toner feed clutch (but if you force toner supply the image...
Hello
You said "they worn out".... Did you check the roller surface?... Normally they last 500-600k without problems. Check the color and the surface (if you use the blue ones)... I sugvest to clean...
It's a full color print?... Because it can happen that the paper sticks on the fuser belt causing a jam . Due to a wrong paper setting.
Inviato dal mio SM-S901B utilizzando Tapatalk
Hello
Try to update Firmware
Inviato dal mio SM-S901B utilizzando Tapatalk
Hello
If you check the Mp6001 series... J151 is "Entrance sensor".... But in the B830 finisher, ricoh jam codes are all similar... Maybe this helps
Inviato dal mio SM-S901B utilizzando Tapatalk
Check the sensor under the registration sensor, sometimes the feeler disappears... At first sight it's difficult to recognize... You can try also with an INPUT CHECK... The value should be...
once with an old Aficio 2075, i my case it was the long black exit feeler, it was broken on the inner side .
Yes!.. Heaters are plugged in in every machine, filters cleaned.... Sp for exhaust fan, drum fan, developmen fan turned on
Inviato dal mio SM-S901B utilizzando Tapatalk