Can be a dirty ID sensor or a malfunctioning TD... Toner and parta are OEM??
Inviato dal mio SM-S901B utilizzando Tapatalk
Type: Posts; User: Codex
Can be a dirty ID sensor or a malfunctioning TD... Toner and parta are OEM??
Inviato dal mio SM-S901B utilizzando Tapatalk
Check the toner hopper
Inviato dal mio SM-S901B utilizzando Tapatalk
Is toner OEM?... Changed only developer? Or so Pcu, charge roller etc?... Parts OEM?
Inviato dal mio SM-S901B utilizzando Tapatalk
Ciao
Check the sponge roller at the exit section (this roller pulls the paper back in staple position) it can be sticky over the years. After the paper comes out, this roller comes down and pulls...
+1 for paper end sensor
But check also the machine during work, if the red "paper end" light turns on and off during work... Then probably the paper tray dont actuate correctly the "paper size/tray...
It seems the pc dont "knows" the machine... Try first to make a ping at the broadcast adress in the CMD console (ex"ping 192.168.1.255)...and after that type Arp - a
Now you should see all the mac...
5 to 10 mm from each tray... Same thing with 480mm paper
Inviato dal mio SM-S901B utilizzando Tapatalk
I checked this part in our machine.. And everything seems to be ok... I followed the allignment procedure with the pivot allignment tool... But have a skewed immage...
Inviato dal mio SM-S901B...
Have the same issue.... Never solved
Inviato dal mio SM-S901B utilizzando Tapatalk
i use a Windows 10 driver for all the Win 7 machines and it works without problems...
If you have another MPC3002 you can restore the data from there, changing the serial number (gives sc995 the first time you turn the machine on).
If not, your machine should work anyway, the...
Hello
Why you have to erase the memory?... If you mean the personal information you can format the HDD. It's not a good idea to make a "memory clear"
Inviato dal mio SM-S901B utilizzando Tapatalk
It's not an EX?
Inviato dal mio SM-S901B utilizzando Tapatalk
Had similar issues... Need PS3 card to print in color.. Otherwise only B/w print
Inviato dal mio SM-S901B utilizzando Tapatalk
Check the the duplex unit (the part above the fuser unit), sometimes a sheet stucks there and it's difficult to see
Inviato dal mio SM-S901B utilizzando Tapatalk
Hello
What means "in the area in fuser C"?... Is the paper in the fuser? After the fuser?... Before the fuser?
Inviato dal mio SM-S901B utilizzando Tapatalk
I experienced the most problems with the MAC network name... If you check the name in the IOS settings... You'll see for example "toms Imac"... But if you check from a windows PC you see "IMAC2"......
In my experience (this morning for example we configured scan2folder in 15 pc's with win 10...and 11) without any problem. If the machine have no smb 2 or 3 you can update Firmware.... Or enable smb...
Hy if the machine bave a SOP it's like normal windows sharing, make sure to use the correct name for the mac... You can check how a windows pc sees your mac on the network. I experienced problems...
[QUOTE=tullio; 2583255]Va bene. Farò questi test. Vi aggiornerò. Grazie. [/CITAZIONE]
There is a RTB for this issue, faulty PCu units causing dust on the led array.Check the Pcu , where the serial...
Hello
Try to increase the Print ready temp. Clean the thermopile and check thermistors, it's easy to mount the thermistors upside down (had this once, the customer tried "do it yourself")
Is the...
Try to invert the connectors... Had this issue twice... Once it was a dirty SCSI card, and the second time i swapled the connectors
Inviato dal mio SM-S901B utilizzando Tapatalk
As slimslob said... It can be a problem on the toner Level sensor... You can try an input check to see if the sensor works. Or you can open the tpner hopper, remove the toner inside and reassemble...
Hello
Do you use OEM toner and developer?... We have still some Mp6000 on the field, i had some issues with the magnetic rollers, or the toner feed clutch (but if you force toner supply the image...
Hello
You said "they worn out".... Did you check the roller surface?... Normally they last 500-600k without problems. Check the color and the surface (if you use the blue ones)... I sugvest to clean...