Thank you so much for your help, a hug
Type: Posts; User: tecnomarco
Thank you so much for your help, a hug
Greetings to everyone, I hope someone can help me... I need the firmware of the Konicaminolta Bizhub C654e to change the display language to Italian... I thank anyone who can help me
I also had problems with the tcr that went to zero i had to replace the black toner power motor so 'i solved i hope you are useful this suggestion
Yes, i have charge new firmware
Thanks Giuboss for your attention .. yes I have updated the firmware and disabled the energy saving ... unfortunately no more than 30 minutes ... over thirty minutes the display turns off and the...
have this samsung multixpress sl x3280 that goes into energy saving after a few minutes .... but it does not reactivate at the moment of use ... by lifting the original cover or by pressing the power...
I have a color samsung x3280nr, the problem is that photocopying or printing a booklet of even 20 double-sided sheets takes ten minutes ... since after three or four prints it does the mixing which...
Thank's occus i change the new drum black but can you explain to me this simulation....machine-print head skew adiustment....ecc
yesterday i have same problem with minolta c454... i have change the solenoid flag duplex.... possible konicaminolta industries don't resolve this old problem:(
Thank's I will do as you say
they are complete compatible drums not regenerated by me
Thank's David ...yes I use drum compatible but I have change only drum black, not colour..:confused:
hello to all I have a problem on prints and color copies of yellow color alignment .... it creates a double line for me a "line position problem ... in assistance mode how can I correct this, can you...
[QUOTE=sanvicente;2112221]Hi,
change motor toner i had the same problem with bizhub c554e
I have solved this problem.... I change the motor toner black... much good the suggestion check level history 1 for check if DV black Is 6-7 %
Tomorrow because now is night thanks for your assistance
does not complete the jobs set in this condition a yellow triangle appears
i replaced the black group with a used one .... it worked for a while ... but after a few time they are clear it seems that no toner is added in the DV UNIT black
hello to all, I have a KM c554e it worked fine ... it started making clear prints as if there is no toner ... I ask you if replacing dv unit black new solves the problem? ... I tried to insert a...
Operativo panel, language 0 and language 1 ..D1491490Q same two copier c4503 and C5503
I have two copiers c5503 and c4503 looking at the firmware installed in the administrator section they have the same ... D1491490Q but the c5503 has 5 languages loaded including the Italian one, in...
GIUBOSS ho due fotocopiatrici c5503 e c4503 guardando i firmware installati nella sezione amministratore hanno lo stesso ...D1491490Q ma la c5503 ha 5 lingue caricate tra cui quella italiana ,nella...
can you explain what I can do I tried the 5-009 as you suggested but the languages available are always those two....ma sei italiano se si parliamo italiano
Thank's GIUBOSS my problem is the language is not preloaded....I would need a firmware D1491490Q which contains the Italian language