We had a customer ask for service on HP Color MFP M880Z document feeder not working & noise from what I could determine the drive coupler/connector is cracked and not turning ADF Feed PU Assy. We...
Type: Posts; User: jmotz
We had a customer ask for service on HP Color MFP M880Z document feeder not working & noise from what I could determine the drive coupler/connector is cracked and not turning ADF Feed PU Assy. We...
Thank you but I upgraded customer
Thank you my bad we are looking to purchase used part
Good Morning
We are looking for Ricoh AF-2060 Operation Panel for LCD & Touch Panel
Thank You
I know they are very old but we are looking for new drums for Canon C130 NP7130
Thank you
According to manual turning off ECM V.8 protocol and JBIG Comp. are turned off automatically although I have not checked bit?
Tried 2 wire phone cord no luck and checked for voicemail and was able to call phone from my cell with no problem.
I did put machine to manual answer and was able to receive fax although machine was...
I have tried settings changes provided by guitar9199
Tried 2 wire phone cord checked line for voicemail and or answering machine and called phone from my cell with no problems /Gift
I did set...
I am going to try suggested setting changes, 2 wire cord etc.and post results.
Will do
Thanks
Thank you I will go there next week
Thank you but we have replaced Fax Module as well as entire machine
Thank you I will try these setting/ I have not tried this but it sounds possible because machine does ring and communication light does come on then machine hangs up no errors of log info is...
Machine acts like its going to receive: rings,communication light comes on etc. then it disconnects. There is no errors or receive log generated?
Customer has Kyocera KM3050 with fax option that works with ECM off baud rate set to 9600 we installed Ricoh MPC3502 and are unable to get machine to receive faxes but does send? I have set ECM off...
Yes I believe so used # D1424272
Thanks, problem does not occur with a different fuser in the same machine? We are thinking its an issue with the rebuilt fusers? Thought i my have missed a step?
Could be blown fuse FU109
Hello,
We are getting SC553 when printing envelopes with two different fusers(rebuilt with sleeve & thermistors) only happens when media type is cardstock or envelope is selected for printing thru...
We are looking for Ricoh-Kyocera Technician in Southern NH
Thanks I will grab one!
Thank you, so my customer is happy scanning to USB memory stick. this is a short term rental (construction trailer) they are using Verizon Jetpack Aircard. I have never installed wireless card on...
Hello,
We are looking for a wireless interface new or used for MPC3001
Thanks
Hello All,
Color print jobs have words missing, printing from Excel XLSX 2013 I have upgraded driver and firmware document prints fine in black & white they are using W7 pro.
Any help would be...
We are looking for new or used job separator type JS-700(B) any help would be appreciated no longer available from manufacturer?
Thank you