Search:

update on my 4100mfp to 4100 conversion.

i got a 4100 formatter board and tried it with the mfp rom but no go.
then i got the 4100 rom and i got a 68 error.
so i removed the hard drive and the...

definitely something for me to think about once my mfp's bite the dust.
thanks

Lance

thanks for the thought.

i once tried to change out the scanner power supply on a 4100mfp but then could not get the belts right and just gave up.
what i did for now is change the toner...

i love these old printers since they usually work so well and are cheap to operate.

right now the power supply for the scanner is starting to fail and i am wondering if anyone knows how to disable...

i managed to take a motor out of one of my not working printers and replaced it in the printer that went bad and i got a screen i could use to change my EIO cards to DHCP.
After i replaced the motor...

My MFP printer decided to break the control buttons and screen so i cannot print or read the settings on the several EIO cards I have.

Is there some way using software to figure out the ip...

the ink only rubs off in a certain area of the photo and this is consistent from photo to photo.
does that still sound like the fuser.
printer doesn't have enough copies for normal fuser problems....

i am trying to print 4 x 6 photos and i get a blotch along the right or top long side about an inch and an eighth from the edge.
i am guessing that something might be on a roller somewhere but does...

Yeah, as you thought, it was not the copier processor board.

i noticed in the circuit description that the scanner power supply board has resettable links so something is tripping it and a power...

i looked in the repair manual for the first time in a long time and apparently all the control signals for the scanner come from the copier processor board.
there are led status lights on the back...

trying to recall what i did on the 1st machine when this happened.
actually i think i changed out the entire scanner and there was no change.
any idea where the scanner electronics feeds into, in...

this is my second 4100mfp that doesn't sense paper loaded in the adf.
if i turn the printer off and then back on, it will sense the paper for a while and work properly but eventually it will not...

after i have the 4100mfp powered on for 30 to 60 minutes i can no longer use the adf as it does not recognize any papers waiting to go through the adf.

to resolve this i can power cycle the...