Search:

Type: Posts; User: sanvicente

Page 1 of 2 1 2

Search: Search took 0.02 seconds.

  1. Replies
    24
    Views
    3,672

    [Misc] Re: Nice Tool-Bag

    We use veto pro pac and platt cases. Bot are rock solid brands with last long products. In the service vans we also carry ridgid pro boxes with spare parts and cleaning products, this boxes are cheap...
  2. Replies
    18
    Views
    5,473

    Re: 224e with error c2564 (tcr 0.0%)

    So yesterday I been able to work with this machine again. I swaped the hopper section and the Hvps with out any luck.

    I ordered the PRCB so now im going to wait.

    Meanwhile im going to check the...
  3. Replies
    18
    Views
    5,473

    Re: 224e with error c2564 (tcr 0.0%)

    Yes! Changing dev and drum and uploading firmware usualy do the trick. Its weird specially because the low meter.

    this is a b/w machine so no other counters. I also reset counter for fuser and...
  4. Replies
    18
    Views
    5,473

    224e with error c2564 (tcr 0.0%)

    Hi,

    I am dealing with a bizhub 224e showing c2564 over and over.

    It has 170k. Started to print with lower density. Another tech went and saw the drum with a scratch and low developer so he...
  5. Re: Looking for feedback on the Kyocera P3045dn printers

    its a good machine. Will do the 50k per year eazy. If you use oem toner you are going to be fine. If you go aftermarket just vacuum the dev unit before switching toners (if dont you would get a grey...
  6. Replies
    18
    Views
    2,628

    Re: Good successor for the BH-363/423 series

    I believe they are right. thats also a common problem dealing with wholesalers here They even sold discount lots of this “battery issues” dead machines for parts. Some can get back working with board...
  7. Replies
    16
    Views
    2,794

    [CQ] Re: Let the fun begin!

    Thats right. We are Buying aftermarket toner at oem cost for months now, unable to find dr512 or dr313 with out paying almost double that We were paying last year, dealing with this developers...
  8. Replies
    42
    Views
    9,160

    [Misc] Re: Toner compatibility

    We have several c754 and c554 running with anything we can get in stock right now: tn610, tn612, tn615, tn616, tn616-l, tn611, tn613, tn413, tn618, tn622, tn324, tn514 and of course tn321, tn711 and...
  9. Replies
    129
    Views
    65,347

    Poll: Re: Do you have a company car?

    We use Peugeot Partners, the diesel ones, so far so good. We can load 3 c224 separated and still keep a low gas consumption. Plenty of room even when i taking back 3 tool bags, 2 spare parts boxes, 1...
  10. Re: We have a daily joke, how about industry pictures?

    50115

    IT enginer with a lot of degrees from fancy universities…
    “i need stock toner, i can install it”

    Beside the waste of toner, I think thats really a nice elegant blue color…
  11. Replies
    19
    Views
    3,877

    Re: 4 Series K Toner Shortage info?? (TN321)

    Same here in Mexico. Our regular suppliers are only giving us less tan half of our request, also our US supliers put us in back order because the shortage. Got to deal with katun but in our...
  12. Thread: tool bag

    by sanvicente
    Replies
    18
    Views
    5,401

    Re: tool bag

    Backpacks all the way. You want to have your hands free for toner, pm kits, vaccum, etc

    I used a Klein Tools electrician backpack for 6 years. It was strong, durable and worth the money. A year...
  13. Re: Techs that work in high covid areas. Prisons, ICU, testing hospitals etc.

    Working on several testing and non testing hospitals. PPE is provided by the company (we are the company because we are a coop). Plastic face shield, face mask, gloves, alcohol, etc. We put a kit in...
  14. Replies
    14
    Views
    5,578

    Re: Power screwdrivers

    6 years using daily a Milwaukee m12 driver. Same battery. An excelent choice.
  15. Replies
    15
    Views
    6,462

    Re: developer charge problem on C454e

    Seen a lot of machines doing that (normally beyond 500k) either c220/c280/c360 and the 4 series. As somebody say a few comments ahead is probably the hopper section. If you can swap it with another...
  16. Re: How much is an hour technical service of copiers in the United States??

    just for the record how much is the hour of tech service in your country? (Venezuela)

    here in Mexico is $35-$40 usd... 😒😒
  17. Thread: C253 toner

    by sanvicente
    Replies
    6
    Views
    1,851

    Re: C253 toner

    C253 is the same toner of a c220, just like the c451 is the same of c452.

    tn217 and tn414 “work” With these machines. Also in the 4 series but in the long run the lack of developer will cause...
  18. Replies
    7
    Views
    3,252

    Re: Kyocera Toner

    Integral toner (german manufactured) works fine. Used in several machines for more than a year in 3-5k prints per month with out issues. Thats tk3102.

    In m2040dn (tk1175) we note a lighter black...
  19. Replies
    5
    Views
    2,380

    Re: Konica Minolta C353 Grinding Noise

    As some coments say in this model this could be a complicated issue. With practice and lot of time you can tray some steps we use to do to get the grinding noise away. We have run this steps with...
  20. Replies
    4
    Views
    1,997

    Re: Toner sticked in fuser roller c454

    Hi, thanks for the advises.

    We use diferent papers with the same result. 3 diferent 8 1/2x11 bond papers 75gsm and 2 diferent 12x18 thick 4 (300gsm). One 12x18 and one 8 1/2x11 where the same we...
  21. Re: Which copier was the biggest piece of crap ever?

    Hated Di151 and Di1610...

    Also any A4 desk color mfp from KM like de c20, c25...
  22. Replies
    4
    Views
    1,997

    Toner sticked in fuser roller c454

    Hi. Have a c454 with toner sticked to upper fuser roller. The image reapeated in the page.
    43681

    First we change brand new fuser unit... 50 prints and again the image repeated. Changed transfer...
  23. Replies
    6
    Views
    954

    Re: PKI Card System........ WTF?

    Hi. Its an old post but want to know if this issue with PKI card system has been solved???

    Recently bought a lot of konica minolta copiers and 4 of them had the same problem... they are bizhub...
  24. Replies
    16
    Views
    3,931

    Re: Cordless bit driver

    35713
    https://m.acehardware.com/product/index.jsp?productId=2938261

    3 straight years, only 2 striped screwheads. With dewalt bits. Very recomended.
  25. Re: For sale: Used copiers for export...over 500

    if u trade konica minolta please send my a mail with the list. actually importing here to Mexico machines from US.

    soluciones.asev@gmail.com
Results 1 to 25 of 29
Page 1 of 2 1 2