Search:

Type: Posts; User: KYO_OEM

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds; generated 26 minute(s) ago.

  1. Replies
    3
    Views
    146

    Re: CS 3510i C3300 error code

    We had the problem on a few 3510i systems when the unit was placed near by the window and there was light coming in from outside.
    Turn the system by 90° for testing.(Maybe end customer can do it?)
  2. Re: 7003i Line on page on long runs 20+ copies/prints

    62160

    Have had same missing clip and system worked well after mounting from new one, but later we got same issue again....
    Finally since drum driving shaft work, no more claims from endcustomer...
  3. Replies
    6
    Views
    432

    Re: kyocera fs-2100 problem

    do you have 24V power supply on YC19/ pin 18 and 3,3V on YC19/ pin 14?
    Maybe engine pcb broken
  4. Replies
    6
    Views
    432

    Re: kyocera fs-2100 problem

    high voltage problem
    remove duplex unit, check/ replace high voltage pcb
    62154
  5. Re: 7003i Line on page on long runs 20+ copies/prints

    have had good results with cleaning from drum drive shaft and usage from high conductive grease.
    Stripes are without rear and front margin, this means drum high voltage problem.
    If we get ground...
  6. Replies
    6
    Views
    536

    Re: kyocera taskalfa 5002i background

    U139 for check from external/ internal conditions only.
    No affect for print quality!
    If we have bad conditions, system can`t work probably.

    After toner replacement image get worse?
    Non original...
  7. Replies
    9
    Views
    578

    [CQ] Re: Kyocera TASKalfa 2552ci drum replacement

    Welcome to the club!
    Yes, well known because Iris series do not like wrong maintenance.
    Extract from service manual/ chapter maintenance:
    (1) Precautions
    Before disassembling the main unit, press...
  8. Replies
    6
    Views
    536

    Re: kyocera taskalfa 5002i background

    drum- and dv refresh 2 times from system menu
    U952 complete setup workflow, not U464/ calib only.
    U139 for controlling from enviroment.
    Have had several cases with outer temp less 17 degree and...
  9. Re: Need Kyocera 3051Ci Charts for Adjustment Please help.

    @Samanator
    i agree with you, but you forgot one important point:

    finally the system was the reason, not the technician, end customer will not buy Kyocera systems anymore...and he will inform...
  10. Replies
    13
    Views
    958

    Re: Kyocera 7353ci magenta problems

    You has to ask kyo tech for reset command in this case
    Have hat same problem on several systems
    This was the reason why I asked kyo for this, after several reminders i received capture files based...
  11. Re: kyocera taskalfa 3051ci Cassete 2 does not work. no paper level. only size ID.

    years ago (>10 years) i went to dealer for technical assistance because cass 2 wouldn`t loaded.
    tech spend >4 h for repair, but he failed and owner asked for additional help.
    I arrived at 11:00 am...
  12. Replies
    3
    Views
    280

    Re: M2635 Drum Issues

    as Tonerkiller has written, it`s important to know if we get margins or not.
    in case of HV error, you get full solid print outs without any margins.
    HV pwb contacts could be the reason.
    Remove...
  13. Replies
    6
    Views
    536

    Re: kyocera taskalfa 5002i background

    try the following:
    drum refresh and dv refresh 2 times
    Running from U952/ setup workflow
    Check U139 temp/ humidity before
  14. Replies
    13
    Views
    958

    Re: Kyocera 7353ci magenta problems

    U467 procedure also usefull for other systems.
    At some system you find initialize button in U468/ e.g.TA2550ci
    For small A4 color systems special FRPO commands needed, you has to ask kyo tech for...
  15. Replies
    5
    Views
    1,636

    [Error Code] Re: Ecosys m3655 jam0105

    at first i would check fixing unit for broken gear.
  16. Replies
    13
    Views
    958

    Re: Kyocera 7353ci magenta problems

    our techs finally replaced LSU units and still same issue.
    At least wrong registration values by U468 found.
    Feel free to clean or change laser unit, but at first i would reset color reg values in...
  17. Replies
    13
    Views
    958

    Re: Kyocera 7353ci magenta problems

    well known for me with CMY at once
    let`s try the following:
    1. reset color registration by U467 (set to OFf/ leave SP/ enter SP again and set back to ON)
    2. Run U469
    let us know the result
    61986
  18. Replies
    5
    Views
    1,207

    Re: 3253 freezing up

    read/ write error in scan partition from SSD, i think
    Run U917/ export
    format SSD by external pc, delete all partitions and assemble again.
    FW upgrade twice and U917/ import
    I think system will...
  19. Replies
    14
    Views
    840

    [Electrical] Re: TA 358ci Power surge.. now lines on prints

    sample pic can be helpfull...
    if possible scan in full format,
    if not possible:
    with or without margins against running direction?
  20. Re: Kyocera TaskAlfa 3510i unresponsive after copying with new DP-772 duplex unit.

    did you reconnect the DP relay pwbs?
    Did you checked the wirings all the way in?
    We have had several unknown errors because of bad connections after shipment.
  21. Re: Need Kyocera 3051Ci Charts for Adjustment Please help.

    I think now it`s running for the moment, but with wrong values!
    Bases on my experience: you will get other problems in future.
    U465 values are depended to U119 and U412
    If you print U412 with...
  22. Re: Need Kyocera 3051Ci Charts for Adjustment Please help.

    One more technician who does not know what`s behind!
    This is the reason why all "secret engineer codes" are not longer available..KDC want to prevent this kind of service.
    I remeber older phone...
  23. Replies
    10
    Views
    1,188

    Re: AK-7110 Jamming

    i don`t think so, but i would take care for the oneway pulleys #36 for the driving belts and the belts #37+38 itself.
    61730
  24. Replies
    3
    Views
    501

    Re: 3 Tiered Color CPC Rate

    maybe this can be helpfull for you...
    It`s my own description i shared to our dealers.
  25. Re: Which small Kyocera's constantly turn and heat the fuser?

    take care for the attachment, i published to our partners/ technicians

    I don`t know any A4 systems with always running fusers..
Results 1 to 25 of 499
Page 1 of 20 1 2 3 4