This does work well. It eliminates the SNMP queries at the start of each print job allowing for faster printing.
I also found that the PCL6 Common Driver from KM also works well and doesn't use...
Type: Posts; User: Ceechtay
This does work well. It eliminates the SNMP queries at the start of each print job allowing for faster printing.
I also found that the PCL6 Common Driver from KM also works well and doesn't use...
We did update the string in the Ports tab, but we like to turn off the SNMP Status Enabled setting there. We also turn off Auto in the Configure->Obtain Settings box. We run it successfully once to...
We have a client who wants to change the SNMP default Community strings on a C650i. When they do this, it causes printing to slow a little (3-5 seconds slower before starting for each print). It...
I did install the upgraded Windows 10 Fiery at the customer and it is working fine. I left the Fiery's two NICs "unbridged" and simply created a stub network between the copier and the Fiery.
...
Thanks for the suggestions about the Windows 7 patch. We did have those applied to avoid the free upgrade. However, Sharp did release a bulletin (#20090) in August 2020 that announced a paid Windows...
Hi all,
We have a client that wants to update their MX-PE10 Fiery controllers to Windows10 for security reasons.
We did get the Windows 10 upgrade kit and upgraded one of their controllers to...
Hi all,
We were switching out a customer's MX-M365N with an MX-M3071 and ran into a problem with their OSA app. The app runs fine on the MX-M365N, but gives the following error on the MX-M3071: ...
Hi all,
Our customer has a Sharp MX-3050N and scans via SMB to numerous different folders. When they scan, they give each file a name before scanning. Just recently, when they scan in a file with...
Hi all,
We have one Mac user who is having issues printing to an MX-3071. She continuously gets "Toner Low" messages and will not print. The toner is not low and all the other Mac users are able...
I'd check the paper tray settings. Via the web page, check System Settings->Paper Tray Settings and check the Feeding Approved Job Setting there.
It's possible that none of the trays are allowed...
Thanks for the suggestions. The copiers do have the updated cleaning brush.
The tech said that the problem persists through developer changes, so I don't think it is weak developer, but we'll...
Hi all,
We are having a recurring problem with streaks on an MX-M904N and an MX-M905 in a high usage environment.
I believe the MX-M905 has around 4 million and the MX-M904 has about 10...
MattL's suggestion should resolve it.
However, if you do get prompted for credentials (username/password), you should be able to print by using admin for both fields.
If port 9100 is closed, that is for RAW printing. Have they tried printing via LPR (port 515)? You can change that by configuring the Port in the Port tab of Printer Properties on Windows.
They...
You can also try printing directly to the copier from the Chromebook. You won't have to add Google Cloud Print to the MFP to do this.
I made a quick PDF with instructions: 41653
If the exact...
Per the Sharp Tech Bulletin, for Office 365, make sure to fill out the fields for Default Sender Set. The Sender Name can be anything, but the Reply E-mail Address MUST match the email used in the...
We have a client that is having occasional print issues with an MX-M1054N.
This client takes pre-printed forms and customizes/personalizes them before mailing, so the forms have different names...
If they really need to accomplish this, they cold use the PrintMulti print processor. It takes a bit of work to set up, but it would accomplish this goal. Website is here: PrintMulti
I've used it...
Thanks again, Dech.
Is there an ftpd file in the /usr/libexec/directory?
I think that would be the FTP server file.
I believe the ftp and telnet files you provided are the client files.
...
Hey, Dech,
Thanks very much for the binaries.
Could you please also post the ftp.plist file from 10.12 (it should be in the /System/Library/LaunchDaemons directory).
That is useful for...
And it may work on a Sharp as well. When you create the scan destination, it has a line for "Hostname or IP address", and you may be able to append the port number in that line (like...
Thanks for the suggestion, but it appears that this app does not allow use of standard FTP ports (no ports allowed below 1024...standard FTP is at 20/21). It would work fine with an FTP client like...
So here is my attempt at the quick and dirty of getting pure-ftpd to run on a Mac and authenticate using Mac accounts. I had originally tackled this using Homebrew to do the install, but I had...
I did get it to work using Pure-FTPd. I first tried using the Homebrew installer, but I was having a hard time figuring out where to do the configuration. So I uninstalled, and then did a straight,...
As for SMB, the Sharp's don't play nice with Macs. I've never gotten it to work using SMB and I've seen a Sharp Tech Bulletin basically saying that changes to the Mac OSX some versions ago broke SMB...