Search:

That is what I'm looking for but do not know how to turn it on or enable it, Mine only shows the message box and the two note boxes, Your screen shot looks like a c754 if that is correct the you...

Tech support is not helping much so hope someone has an answer! My customer had a c6500 with a IC-305 and we had account track setup so if you dropped a file into the fiery you could pull up the...

Thanks, I will check out that sensor!! :cool:

Hi All!
Have a stapler that staples in the front, and double side positions but does not staple at the rear position and just exits the paper. Has anybody seen this problem before!

Any help would...

I have seen this and found the doctor blade is not adjusted correctly in the DV unit, Just determine the bad DV Unit and replace. You also can confirm by checking the gap at each end of the blade,...

can i use the same firmware that a konica minolta c6500 use's . Have one with c-4501 codes and would like to reflash firmware but do not want to kill board. Any and all help would be greatly accepted.

Thanks everybody for all the good info!

I know there are posts on this already but, i need to talk to someone who has actually gotten it to work. I have installed the updated firmware for this issue and gone Thur all the settings required...

Thanks for all the good feed back!

Have two customers that just replaced thier waste toner boxes and now intermittenly come up with "Install waste toner box" have replaced the waste toner sensor PC8 I belive, reflashed firmware "KO",...

Thanks for the tip!