there is a solenoid(fk4-0725-000) in the right front cover and it was sticky, that was the problem
Type: Posts; User: ernesto
there is a solenoid(fk4-0725-000) in the right front cover and it was sticky, that was the problem
I replaced itb unit and registration drive assy fm1-A225-010 4 month ago and Thats solved the problem
thanks a lot ;-)
HI
The transfer cleaner unit fm2-5523.000( irc 2380) is out of stock.
Does anyone know where it can be bought?
or how can it be fixed?
i cleaned the sensors int he process unit but it did not work and I EXCHANGED the process unit with other machine and now both of them are working ...............???????????????????????????
the encoder wheel was the problem, some encoder bars was deleted
does anyone knows the problem??
it happens to me the same error code 012 -404
i replaced tha main controller and that solves the problem
thanks for your answers
all the best
I am not reloaded because I exchanged the hard disk with other machine and in the other machine the hard disk works right
Hi
I have a irc 3580 when it is starting and the bar is nearly finish error 602-0105 appears
Does anyone knows the problem?
I replaced hard disk and net card adn memory RAM
i hope to...
the blue lines are on the top of the picture
HI blackcat thank you very much for your answer
I enter in service mode and M Cnt A is 109.812
M Cnt B IS 30.527
do you know what is the black drum...
Hi
A Taskalfa 2551i ci prints blu lines on the top fo the sheet in color mode
I always repair canon machines( the customer ask for a favor) and this problems it seems cyan drum problem, how...
THIS LINK IS GOLD
and CANONBUNDY IS THE MASTER
HI
i have several machines canon irc1325 they jam
intermittently every 10 or 15 print only in doble side mode (jam code 0190)
if don t use doble side mode there is no jam
Does anyone...
HI
I had an intermintent error 225-001, it appeared every month 2 or three times
I Replaced ccd and that solves the problem
All the best
I replaced main drive assembly (FM0-0040-030) and that solves the problem (e074-002). It must be said that the solenoid in the main drive assembly was sticky, may be fixing the solenoid could have...
HI
I found a irc 355 with itb asembly inundated with waste toner
it seems every thing is ok, the waste toner motor turning around and the hole betwen itb and waste toner is empity
Does...
HI
i have an intermintent error E074-002, it seems the problem is the maindrive, ( I replaced the itb but the problem is still there)
does anyone know the problem?
All the best
canon ir 1018 download standby
install the BootROM first
then System
I Replaced the Hopper Unit (Y) 3 three days ago and there is no e025 code error for now
HI
I have an irc 2020 with intermitent error irc e025-000
the density yellow is right near 0 (-080) and the yellow color is ok, tough the drum yellow drum life is 90 per cent
I replaced...
You are welcome ;-)
it happene to me about 2 years ago this :" irc 5035 warns close front door and it is, if you turn off the machine and turn on again it works about five and ten minutes after that the machine warns...
I think you only have to turn on a mecanical switch above the plug (in other machine irc 5035 I did that and it worked)
HI
I have a irc 5035 Cassette Heater for host machine don t warm, the same Cassette Heater for host machine in other machine irc 5035 works
does any one what board run the cassette heater for...