Search:

If i have understood you have 5 PC and 1 MFP ?
If you try to ping HOSTNAME from another pc ? same HOSTNAME you receive fails to connect from the mfp.

Someone can update the solutions of C300i? Thank you very much

In my case recovery tool not start.
Firmware not start.
Removed the SD i can do firmware update and use recovery tool to check CPU was good.

I changed the broken SD.

[bizhub 4750/4050] Customized firmware: Support for SMB 2.0 (Without downgrade restriction)
ID-No. DLCSES_1709377EN

[Download file name]

bizhub4750Series_Cont_A6F730GCA00-W51.exe
...

Directory traversal vulnerability in Konica Minolta FTP Utility 1.0 allows remote attackers to read arbitrary files via a ..\ (dot dot backslash) in a RETR command.

CVE -
CVE-2015-7603

Thank's a lot mojorolla for this post.

In my case recovery tool not start. Removed the SD i can do firmware update and use recovery tool to check CPU was good.

No led lit on card reader? (white or green?)

Some Ysoft Card Reader detect NFC antenna as a badge. You can try to remove the antenna circuit.

I had recently a C308 with MFP Controller - download NG, the problem was HDD (no error).
Try to disable hdd and try to upload firmware with hdd disabled.
If work i think you need to change hdd.

If you enable in administrator mode
Security-> PKI Settings->Enable SSL Version->Mode using SSL/TLS->Admin mode

You can see the menu Security-->"Administrator Password Setting "

and change...

I'm interested too.

Check with OpenAPIApplicationManager if some application is installed. Remove everything except the marketplace.

Replaced the High Voltage board and resolved :). Thank you very much!

I'll try in a few days and let you know.

Same problem for me
Background I series

You use reset tool for CPU board before the change?

Someone have problem with light grey background on i series (C250i C300i) on color print? You can see only if you compare with a white sheet of paper.
Color drum 60-70K copies.

For me, the only difference between the two "2nd image transfer roller" is the gear that couples the transfert belt.
The new transfer roller as the gear as the series 4e and 8.

In my country
57162

You can find the file in this firmware versione bizhub C754e/C654e Initial Mass-Production Program (Ver.G20-80)

In this case tray to set "Power Consumption in Sleep Mode" in Disable.

Check SW 12



Addition of the authentication device



Settings(Enabled/Disabled) of Card authentication device for PKI(Card3)
DipSw No.12 (bit 1)

No code on "Detail code history" ?? 0x1FFF

If you have a lot of 0x2201900000000100 are firmware failure or CPU board failure.

THRL_DebugFA14Log
Detail code, Total counter, ADF document...

I receved "Error code 0" when from remote a try to scan an empty glass with "remove blank page" enabled.

Yes CS Remote Care.

Tried to insert the usb pen directly on "Front USB" port by removing the black cable ?