Thanks for all the reply. I'll look into detection at the back of the tray and also the linked thread.
Unfortunately you can't just override the detected size as far as I know 😥
Paul.
Type: Posts; User: paulrid
Thanks for all the reply. I'll look into detection at the back of the tray and also the linked thread.
Unfortunately you can't just override the detected size as far as I know 😥
Paul.
Hi all,
Long time no see :)
I have an C454e but its showing 8.5x11 on tray 2 even though its got A4 in it, both tray 1 and 3 show correctly. I've seen this many times on C220 type machines and...
by hand? That can't be done 😂 They weigh more than a small car lol
I would have said im busy that day 😂😂 but as its now Tuesday how did it go?
Sorry all for not replying I've been side tracked for a few days 😂
I havent been been back to this yet so I'll try a few more things and let you know, probably just swap it out.
Thanks for the reply blackcat,
i have printed those those off but don't have them to attach but I could see the pattern for all colours, when I swapped IU's the pattern were identical. We may...
Thanks for the reply.
I have printed half tones but can't work out what it is, magenta is the worst but if you look close (harder on the scanned copy) but you can see similar patterns in all CMYK ??...
Hi copyman thanks for the reply,
no not new but good ones from a working machine and also fuser but forgot to say that and yes stopped and checked ITB and the lines were there.
Paul.
Hi all,
i have a C203 with quality issues see attached. So far we have changed IU's, ITB and secondary transfer roller reset and stabilise but can't get rid of them. It seems to effect all...
did you update the driver? Old one will do basic printing but won't work with account track due to different signing?
I get these from various c203/253/353 machines but never really managed to get to the bottom of it.
not too concerned really as when toner is replced it goes away well until the next one 😀
Paul.
I was there today and even though last visit I moved the lead from one USB port to the other I didn't try the USB stick in the rear port but as advised today I did and guess what it worked 👍
I may...
Hi synthohol next time I'm there I'll try that but.
Thanks Paul.
Thanks Bix but they are all set to on.
paul.
Thanks mo but I'm sure it's not the USB sticks I've tried as there are other c220 at this location which work fine with them.
paul.
Hi all,
i have been been to a c220 this morning where the front USB port doesn't seem to be working, when I insert a USB stick nothing happens not even the graphic at the bottom of the screen. It...
Thanks I'll give them a try.
Paul.
Hi all,
just a quick question about a very small squeak on a C452, when the printer is idle as in not printing but not in power save mode there is a very faint squeak. I've checked things like IUs...
Hi all,
i'm embarrassed to ask this but I needed to change the staple cartridge on the saddle for this finisher, customer had already taken the cartridge out but no matter what I do I can't get it...
Hi,
i don't think the TCR level being at zero is the problem I've seen this when you get errors and until the machine prints something it shows zero. Have a look at the sensor check in tech rep and...
Check the small plate where the chip on the toner presses against when inserted into the machine, there should be 3 pins sticking out which connect to the toner chip. I have seen these bent in or...
Only difference is the chip I've swapped many around.
Thanks but the code I have is c2257 not c2557 I wish it was that easy :)
worth a try but we don't have this problem on other machines :confused:
i'm not using OEM toner never have done in all my machines, I know people will stay clear but it's never caused me any problems.
paul.
Must admit I haven't updated firmware so I'll give that ago next time I'm there :)
many thanks for the reply
paul.