Search:

Is the smart controller sorry (look attached picture), inside this controller is the Hard Drive
that i need to clone, anyone knows how to do it ?

I have a Xerox 7665, i would like to know if it is possible to clone the external Fiery hard drive ?, i already try to clone this hard
drive to another hard drive using Acronis true image, Easeus...

Inside Service Mode i have only the following routines inside adjustments :

dc129 System Registration
dc131 NVM Read/Write
dc301 NVM Initialization
dc527 DADF Size Detection
dc671 Measurement...

I have software version 040.033.53050
To enter service mode in this machine i need to press
the following keys : # * Stop and 6789
What calibration i need to do inside the service mode ?
The...

I get an error every time that i make the printing calibration, i don´t have any errors at copy calibration and the copy result is fine.
This error appears inmediatly after reading the 2 print...

Thanks for your response, just one more question, the system software ( V040.033.53050 ) are stored inside the hard drive or inside a memory in the machine ?.

I have a Xerox 7655 with the latest update and working fine. I would like to know how can i make a full backup of this machine, i mean could i extract the hard drive and make an "image" of the hard...

I have a Xerox 7655 that asking for a username and password ( admin - 1111 ) to be able to scan to pc any document, is there any way to disable asking for username and password every time that i want...

Recently i change the backup battery of my 7665 , at the time to turn on again the machine say 7655 instead of 7665 is there any problem with that ?, the printing speed will be the same or how can i...

I´m from mexico, where is this battery located ?

Where is the battery located ?, is the one that have the motherboard where hard drive is conected ? Software version : 040.33.53050

Every time that i turn on my Xerox 7665 the machine display a message that there is some kind of mistake with the configuration and ask me to configure again the Language, keyboard language and date....

It Works !, Thank you very much for your help !

I found the sim cards !, i have 3 sim cards, scan/email ( 301k15390) , JBA ( 301k15420 ) and B1 Key ( 98S04876 ). What i need to do with them ?

There is no scan to email enabled and never was, there is only one PCI card in the controller with firewire conector, the software is : 040.33.53050 One more thing : when this machine was working...

I bought this machine with the "Network Scaning" function enabled and used for about 6 months with no problems, suddenly this option disapear !, i don´t have any cd or sim, how can i get one or where...

Yesterday my machine was working ok, today the "Network scaning" option is missed. I would like to know how to re-enable the "Network Scaning" option again, i don´t have any cd of this machine. Any...

I have a Xerox 7665 that i buy in USA, actually i´m using this machine in mexico but when i try to use this machine with toner that i buy from a mexico dealer the machine display a message...

I use this printer for print business cards on 11x17" paper loaded on "special tray (5)", i have problems when i try to print business cards for both sides, the print not match, i print the front of...

I have a Xerox 7665 and a white thin line across the paper ( long side of paper ) apears in the same spot everytime that i print images with magenta or green and only with magenta or green images all...

Ok, i will try with PCL drivers it looks very similar to postscript drivers, what is the difference ?, is there anyway to send more than 99 copies by print ? ( i´m using windows 7 x64 printer...

The software version is : 040.033.53050

Actually i print directly from windows using windows 7 x64 with xerox postscript driver for 7665, i would like to use something more professional like efi...

Thanks for your response, what is the name of that controller ?, can i download from the Xerox site ?

Anyone knows a Fiery client for the xerox workcentre 7665 ?, i already try with the latest efi command workstation 5 but the software can't find my printer, also i already look in the efi web page...

I'm not familiar with this model and don't have a manual for it. If you could let me know the step I need to choose face up, I would greatly appreciate it.