Search:

Type: Posts; User: Herrmann

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. [Misc] Re: iR7105 Messing up alignment while printing

    Replace the registration roller clutch, and check, if the rollers itself are in good condition and their bearings are ok
  2. Re: Canon IR Advance 6555i Light copies and prints

    One "Head up" is missing here: The canon IR ADV 6xxx and 8xxx are "white writers" whitch means a soiled Laser will produce darker(!) images. So look for corona,transfer or developing issues. You can...
  3. Re: Canon Image Runner C5051 Factory Default Reset

    Maybe the "SVMD-ENT" Value is changed ( SV Mode Level 2 option fnc sw) . Try *49* instead
  4. Replies
    4
    Views
    1,386

    Re: C7000 pro with black not registering

    Just wondering...
    Black is the reference on these models,
    maybe black is correct and the 3 colors are out of spec?
  5. Replies
    12
    Views
    3,733

    Re: IR 2830 paper jam between drum and fuser

    There is a damper Pad at the end of the sensor flag, that becomes sticky. You can check this: apply some pressure at the sensor flag downwards, then try to move it upwards. If you feel a resistance...
  6. Replies
    18
    Views
    5,284

    [Misc] Re: Problem MPC4503 in papel SRA3 to 250gms

    What i forgot to mention: This Model had a lot of Firmware issues, sure, that your Firmware is the latest and greatest?
    Try a lower Resolution, does the error disappear?



    Its fine for me, now...
  7. Replies
    18
    Views
    5,284

    [Misc] Re: Problem MPC4503 in papel SRA3 to 250gms

    I could not see an example, so this here is a complete shot in the dark, but maybe it will help you. Your description sounds for me, that the problem happens, when the heavy stock leaves the...
  8. Replies
    2
    Views
    1,468

    Re: Error Code E 350 -0000 on imagePRESS C 600

    Have you tried to interchange Boards from one to another Maschine?

    Check this Thread, maybe it helps you to recover the Maschine:
    ...
  9. Thread: ir3045

    by Herrmann
    Replies
    6
    Views
    2,905

    [Error Code] Re: ir3045

    Sounds for me, if the Power Supply for the Reader is gone
    Check in that Direction

    greetings from Germany
  10. Replies
    7
    Views
    5,121

    Re: MP C401SR Sc502-00

    If the lifts are equal, interchange them and look if the error changes to tray one
  11. Replies
    3
    Views
    7,107

    [CQ] Re: # A1-5610 in X4300LX

    its not the x Model (color), its the k Model (BW)

    A1-5610 is Toner Supply Motor Error.
    Check if the Toner is not clogged and if the Stirrer in the Toner Cartridge runs smoothly
  12. Replies
    22
    Views
    18,900

    Re: error E020-1060 canon IRC 2220

    And dont forget to clean the Polygon Mirror as well! Had this several Times
  13. Replies
    0
    Views
    1,731

    [Error Code] Booklet Finisher SL-FIN701B Parts missing

    Hello,
    i am having Problems with a Booklet Finisher SL-FIN701B giving me an Error H2-8682.
    The Service Manual leads to Sensor S37 (Booklet Paddle Home Sensor) or Booklet Paddle Motor M21.
    Ok, so...
  14. Replies
    6
    Views
    3,896

    Re: AdvC5235A E0225-0001

    We are talking now about IRADVC 2025, right?
    If I remember correctly, there was a Bulletin about a faulty Power Supply, causing several errors. Maybe you should give it a try
  15. Re: Canon IRA C2225 Blank Streak on Copies/Prints

    Service Mode: COPIER > FUNCTION > MISC-P > SHT-OPEN
    Pull out the Drum Unit
    Remove the Dustproof Glass cleaning tool from the Front Cover
    Insert the Dustproof Glass cleaning tool into the groove,...
  16. Re: Konica 7060 Jamming/Warming Up/Losing Adjustments

    Sounds for me like a Power supply Issue. Bad Solder Joints can lead to such a strange behavior.
    Give it a try and resolder thoroughly.
  17. Replies
    13
    Views
    17,995

    [Error Code] Re: Canon IPF 750 error code 03130031-2F2A

    2F2A is a Linefeed Error, maybe the Lubricant on the polished Metal Bar becomes sticky, causing the Carrier run too heavy. Clean thoroughly and lubricate with thin Oil, this should help.
  18. Replies
    2
    Views
    1,288

    Re: Samsung SCX 81123NA missing image

    Soiled Laser due to spilled Toner/Developer
  19. Replies
    9
    Views
    2,173

    Re: Canon ir adv8085 slow

    Just a shot in the dark:
    I had a similar problem on a advc7065, it turns out to be the image controller (main controller 2 if i remember correctly)
    If you have an organ donor, maybe you can give it...
  20. Replies
    18
    Views
    3,016

    Re: Canon 7095 Light Prints on Damp Paper

    not the wires, turn the whole corona assy upside down, there you will see plastic screws, wich adjust the heigt of the corona wires. with 1.5 turns i meant one and a half turn.
  21. Replies
    9
    Views
    2,173

    Re: Canon ir adv8085 slow

    Did you monitor the fusing temp? if it gets too low, the mashine slows down, maybe this is a hint in the right direction
  22. Replies
    18
    Views
    3,016

    Re: Canon 7095 Light Prints on Damp Paper

    First at all, after replacing the corona or the wires on a canon box, do not forget to reset the counters in service mode, otherwise the mashine wont use the correct corona currents.
    second: turn...
  23. Thread: pdf.lck

    by Herrmann
    Replies
    3
    Views
    4,027

    Re: pdf.lck

    see the "550 permission denied" ?
    This leads you in the right direction
    You must garant the mashine full access to the folder.
    Reason is: the mashine generates a "lck" File while scanning, if...
  24. Replies
    6
    Views
    1,189

    Re: Cyan as a grid on 9060 Pro

    Had the nearly same Thing Time ago; try to change the Laser Units (I would suggest Yellow against Cyan) and see if the Error goes along with the Cyan Unit
  25. Replies
    1,148
    Views
    766,103

    Re: What is the best YouTube movie you found lately?

    Not really a Movie, more Music. This is the perfect "en Passant" Music while working in the workshop :)

    https://www.youtube.com/watch?v=1qKS51qh4OY
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4