Started to replace the registration roller and discovered the lower conveying roller 3AL08112 is also trashed. Nobody online has it and Kyocera is not showing an ETA so it looks discontinued. Anybody...
Type: Posts; User: umdatchau
Started to replace the registration roller and discovered the lower conveying roller 3AL08112 is also trashed. Nobody online has it and Kyocera is not showing an ETA so it looks discontinued. Anybody...
No other symptoms. In fact, the machine is still making great copies. I have already replaced the fan, power supply and logic board to no effect. The parts I used were out of another working 35 but...
The developer fan (located near the back of the machine in the center. It appears that it cools the developer unit) will run normally during copying/printing but goes into a pulsating mode a few...
I am looking for di200 part: 4011-5757-01 actuator=fuser exit flag. It seems to be very rare and km is not making it any more. thanks john
looking to buy 4011-5757-01 actuator for Minolta di200. It is the fuser exit flag. thanks john
RX report is showing ip-rx MODE receptions about every minute, 1" duration and 0 pages. Result is EBE0DD. If I disconnect the network cable it will stop.
TX is odd: 5 tx were sent, 2 of which were...