The first picture looks like the feeder is up too high on the left. Maybe check the sensor that tells the machine the top is down.
Type: Posts; User: campy
The first picture looks like the feeder is up too high on the left. Maybe check the sensor that tells the machine the top is down.
It's the exposure lamp. It's a florescent bulb and is not getting to full brightness so the machine shuts down.
Thank You
I couldn't find anything. Do you happen to know the name of the document?
It does have a 2 line cord.
I updated the firmware and they called today and said they are getting calls from doctors offices that they can't send the faxes. I have faxed them 3 times without any problem. I think the hospitals...
I will check that. Will this allow to copy while faxing out?
They don't fax from the pc.
I have a customer that says she cannot copy while faxing. I can't seem to find out if it's a setting. Aren't these dual function?
I can't login. I'm not authorized Sharp service.
Is the firmware a tricky operation on Sharp? Where can I get?
Ok thanks
I tried to do a search for this but I don't understand why I can't search "maintenance code TA" and come up with hits . Anyway I have a MX-4071 with that code and it won't reset. I tried the transfer...
Anyone have these for download?
Thanks in advance
Ya your right, there not even close. I wonder if the upper roller is the same.
I have a M3540idn that needs a fuser FK-3100. I have a M3645idn but that uses a FK-3130. On the older FS1135 type copiers the fuser was the same as other models but you had to swap the exit sensor...
What you can try to do to clear up the copies from generic toner is to put OEM toner in and run 50 or more sky shots to run out the generic toner.
I followed this video and after running about 50-60 copies it seems to work. I couldn't get 1 copy before. I will test some more. I used a high temp grease that I use on Canon and HP.
Kyocera...
How does that slow the fuser without making a gear noise?
Anyone having problems with the fuser film not rotating and causing the paper to stall going through. I have had at least 3 and 2 of them have been the same machine. I replace it and it works fine...
Thanks. Is there anything tricky about removing the charge roller? I noticed a spring attached, does that come out with it?
Any instructions or videos on how to disassemble the drums for 307ci? I want to clean the drum blade and cleaning lamps due to streaks.
Thanks
I think I will stay away from them unless a come across a great deal.
I am thinking of buying a couple of used low mileage but I am not familiar with the build quality or reliability. Any comments or anything I should be aware of?
Thanks
It turned out to be a burr in the bridge unit. Thanks for the help.