Search:

After a jam from using non brother toner, they scored up the fuser film pretty bad so a new fuser is needed. Brother stocks it, but kind of pricey. D01CEC001 is the number from the manual, but online...

The 3 wires from the sensor to the board connector read ok. Theres no voltage on any of the pins when you power the machine on, so I guess the sensor is ok, and could be one of the boards, but what...

Found one on precision roller....the link posted in the above thread does not seem to work here.

I installed the new sensor and still same error.

It makes some mechanical cycling sounds, mostly...

The rear door does not seem to be detecting a closed sate even when its closed. I cleaned the flag sensor with a qtip, no help, so I wanna try replacing the sensor which is
part no. RC2-2879-000....

I confirmed it, says close back cover...and its closed. Cant see anything obstructing the door. Hard to make out the switch thats detecting the door open-close. Might be a sensor with a plastic flag...

Havent powered up or confirmed but cust says the rear door has problems preventing the printer from working. Wondering if its common to see a bad door switch or something on these?

Searched this...

The pickup roller arm comes down and hits the paper, but I dont see them rotating, so no paper is getting moved.

Found some articles online for models close to this, but the mechanism seems...

Update -

Well spoke too soon. Clicking is gone but wont print. Now found a piece of plastic, like
part of the carriage frame on the purge carriage. Took it out and still wont print
so am...

Looks like I got this one cured.

The sliding purge carriage definitely was the issue.

Turns out if u turn the machine upside down, there is a lever on the outside
which runs on a groove inside...

On power up, does its startup cycle ok, but will make some terrible gear clicking / grinding noises near the end...otherwise will print ok.

Took it apart and saw the cleaning / purge area was...

Posted this sorta in another similar thread regarding B200 on Canons, and was told either printhead or motherboard. Thought I would post here what I already did and ask a few questions.

From what...

In this case its a MG8120, I'm seeing them for $180 - $200 or so. Not sure if the error code is the same as the model in this
discussion, I am guessing its the same. Client says its about 7 yrs old,...

Saw a video that says to clean the printer head in water. Has anyone here done this w success?

First Brother laser I am servicing. Cust bought a new Drum / Toner Unit in DEc, has like 300 or so copies on it, and now it has a dark print problem, and the contrast potentiometer on the back does...

The former tech got back to me again. He said to make sure the thermistor, which is in that picture attached to the shroud, is making physical contact with the heat roller. Its mounted on a flexable...

Trying it as an attachment

Still no good. Here is a URL for the photo:

http://users.adelphia.net/~techforce/3010fuser.jpg

Or: http://users.adelphia.net/~techforce/3010fuser.jpg

Post...

Hopefully the photo appears this time

Bob L wrote:



Hard to tell. It mounts to the inside of a plastic removable shroud...Ill try attaching a pix of it here.

Next to it is the thermistor. The shroud is not adjustable, and just...

I replaced the fuser lamp which was burnt out and is the main problem. I can see through a crack near the fuser door, the lamp lights, and it pulsates as if its trying to reach a certain temperature,...

Bob L wrote:


Well, I wound up calling Xerox directly, and they steered me to a \'time and materials\' department which is for parts for machines out of contract, which mine is. They have the...

Hey, I found out that the fuser rod is open. Also the roller its enclosed in , which is brown color, is scored on the left side. Anyone know a good site or company to call for these parts? This...

Here is the photo http://www.copytechnet.com/components/com_simpleboard/uploaded/files/xerox3010.zip

Post edited by: technotronic, at: 2006/02/25 16:46

Machine worked fine, then one day after saying \'please wait\' in the dispaly, it beeped, and give this error code. I was able to get some info on this error code from a manual someone online had....