Search:

Type: Posts; User: Athlontini

Page 1 of 11 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    0
    Views
    481

    HP E42540F parts availability for ADF

    Had a call for one of these tiny MFPs that is being used quite a bit for scanning. The service manual only lists a procedure for replacing the rollers in the ADF (apparently the entire top cover...
  2. Re: C4504ex SC272-01, 272-02, 670-02 first thing in AM

    I changed the laser unit, also both 50-pin ribbon cables coming off the BCU. The client continued to call in for the error, so we replaced the machine with a loaner which has not given them any...
  3. C4504ex SC272-01, 272-02, 670-02 first thing in AM

    Hi guys,

    MPC4504ex, pops any one of these codes just about every day around 6:30am. 670-02, 272-01, 272-02.

    Replaced BCU board, IPU board, BCU-IPU harness and ribbon cable, LDB-IPU harnesses,...
  4. Replies
    14
    Views
    5,745

    [Misc] Re: MP C3004 PCU

    Our company uses them, works great so far. We don't even order the c3003 PCU's anymore.
  5. Replies
    9
    Views
    10,918

    Re: Riso comcolor

    I'm going to be getting trained on the GD and FW series soon. Really hope there's some knowledgeable people in here for when I start working on them...
  6. Replies
    25
    Views
    5,209

    Re: c6003, c6004 pcu

    I have put 03 PCU's into 04 machines, so it will work, but my understanding is that the new 04 PCU's are actually cheaper, so my dealer is only ordering those PCU's going forward.
  7. Replies
    11
    Views
    9,209

    Re: IM350 new setup

    Does it work if you network it without DHCP? Is it just the web browser function that can't connect, or can nobody print to the MFP at all?
  8. Replies
    3
    Views
    3,109

    Re: MPC4502 J060 when running transparencies

    I actually got it running by changing the orientation to portrait, so the white strip ran along the top of the page. Time will tell if this is a permanent solution, since SEF seemed to be the fix...
  9. Replies
    3
    Views
    3,109

    Re: MPC4502 J060 when running transparencies

    Bumping this thread because I have the same issue on the same machine. Only i cannot run any transparencies, gives J060 every time, if it is a print job, it tries to come out of the bridge exit tray...
  10. Replies
    6
    Views
    2,274

    Re: mpc8002 doc feeder issue

    See if there's a firmware update for that SPDF. They just came out with one for the Metis series that addresses separation issues (multifeeding, sep sensor jams). Also a good idea to replace the...
  11. Replies
    22
    Views
    4,454

    [CQ] Re: MP C300 1200x1200 image issue

    I'd guess it's color PCUs or dev units. You mentioned you replaced the black PCU, and on the example sheet, black is the only one not making the repeat image.

    Also, I happened to see this same...
  12. Re: can i use a mpc5502 fuser sleeve on a mpc3502?

    I used to get fuser codes when I (accidentally) used to put 5502 sleeves in a 3002/3502. They were really intermittent, but they were there. On the other hand, I've run across machines where another...
  13. Replies
    21
    Views
    35,616

    Re: MP C305 Toner not set correctly?

    It usually just means that one of the spring-loaded retainers is out of whack, and is pulling open the chute as you pull the bottle out. I've fixed this by simply taking off the top cover (1 screw!),...
  14. Replies
    14
    Views
    1,446

    Re: New Ricoh have no USB-B socket

    Looks like USB-B won't be standard going forward - it's been missing on every newer box I've seen.

    Hooray, paying extra for old features!
  15. Replies
    6
    Views
    3,239

    Re: SPC831DN fuser past 330k, is there a fix?

    If you have a brand new fusing sleeve, take the little fuse out of the box that comes with it. When you go out to the client, you can attach this to their "new" fuser to make the machine think it's...
  16. Thread: MP C4503

    by Athlontini
    Replies
    8
    Views
    3,654

    Re: MP C4503

    Try flashing the full package firmware or update all the rest of them individually. The Firmware History mentions that the Fax, FCU and Network Support firmware also could have bugs that cause this...
  17. Replies
    3
    Views
    3,109

    MPC4502 J060 when running transparencies

    Hi all,

    I have a machine giving an occasional jam code 60 only when transparencies are run through the bypass. The user's driver is set up to deliver the proper paper type settings. The...
  18. Replies
    6
    Views
    2,236

    Re: MP5002 jam code 25 LEF only

    This is what took care of the issue, but I appreciate everyone's responses. I removed and cleaned every single one-way in the duplexer, and just for good measure, I pulled the exit assy and gave it...
  19. Replies
    8
    Views
    2,325

    [Jamming] Re: Ricoh MPC5501

    This. Ricoh refers to it as an "open/close guide" and they released a TSB for this.
  20. Replies
    6
    Views
    2,236

    MP5002 jam code 25 LEF only

    Hey guys,

    MP5002 getting a duplex jam 25. Only seems to do it on duplex jobs that are more than 1 page. When it jams, one sheet of paper is halfway into the fuser and two sheets are in area Z, one...
  21. Replies
    6
    Views
    884

    Re: DF3010 (mp4000, mpc3500)

    This is always the culprit, in my experience. The part number for the gear/shaft is B8022231.
  22. [Jamming] Re: MPC2503 Y toner hopper breaking due to compacted toner - Advice please

    This is generally what we've been seeing. It is important to clean the plastic vertical tube that sits between the dev unit and toner hopper. It's held on by 2 screws to the rear frame of the machine...
  23. Replies
    12
    Views
    3,631

    Re: Ricoh MPC 2051

    Here's another way of getting rid of the noise:

    Add the fusing oil supply rollers to the fusing unit. Part# D105 4385. These will look similar to the ones in the MPC2050/2550. Comes as one...
  24. Replies
    5
    Views
    1,623

    [Jamming] Re: Ricoh mp2852 Unusual Jamming problem

    Check the paper feed clutch, the gear teeth may be broken. It's driven by the main motor.
  25. Replies
    10
    Views
    2,025

    Re: 2018D - Unexplained errors

    SP5801 clears all of the NVRAM settings. It will not reset a fuser code, you're thinking of SP5810. Not all models have this SP mode. I believe on your model, you reset the fuser codes by simply...
Results 1 to 25 of 270
Page 1 of 11 1 2 3 4