I have a couple of these HP M527's in the shop for constant reports of "tray 2 lifting errors" these are high page count units. Has anyone come across the lift error messages on these? I generally...
Type: Posts; User: adamcopiercali
I have a couple of these HP M527's in the shop for constant reports of "tray 2 lifting errors" these are high page count units. Has anyone come across the lift error messages on these? I generally...
Thanks for the reply. Yes, I am doing it through the support menu. I'll leave it on overnight and see what happens.
Have a HP M652 I am attempting to update firmware via USB stick and it seems to be stuck, has been updating for 30 minutes. Can I unplug it or will I be causing myself more work?
Hi,
Was wondering where you guys get your canned air from? Recently it has been harder and harder to find locally at a reasonable cost. What brand/s do you like best? And where do you buy from?
Can the Fuser/maintenance message on a WC3325 be reset or is it fuse based?
Hi. I replaced the fuser in a Bizhub C35 for jamming in the fuser however it is still jamming in the fuser, and it only jams with legal size paper. Any ideas why it would only jam legal? With both...
Machine is throwing a 57.00.08 error after initialization. Tried a new fuser and transfer belt as it was making that "grinding sound" when powered on, that the old CP4525's would make when the...
That's what I thought as well, but when I looked at another transfer belt, I did not see that part on the cleaning assembly.
Does anyone recognize this piece from a HP M251NW?
59815
59816
I found this piece in the paper tray of a customers printer, covered in black toner. Its a clear soft rubber plastic material. I...
I have a Muratec MFX-3535 that will jam the last page of a multiple page feed in the ADF. The last page will come out of the exit area of the ADF about 75% of the way and then will jam. Any thoughts?...
Thanks for the tip. Currently have two machines in for service for this issue, this method solved it for one out of the two machines.
I have run into a handful of these M428's that will not connect to the network, will not detect that the ethernet cable is plugged in. Is this a known problem with the Formatters? Which I cannot seem...
Had it off for a couple of weeks, same error. It's odd because it worked fine when it was put into storage.
Pulled this Lexmark C4150 off the shelf, powered on and it is giving me this 900.00 Firmware Error (Pic Attached). It was working fine last week. 56254
Sorry about that. Yes, same CQ issue and the black drum was way overdue for replacement.
Hoping for some guidance. Filling in for a colleague, working on a MPC 5503. Not too familiar with these models. Replaced a PCU for PQ issues, however unit is still having issues. Attached are...
Thanks for the information. The Developer and Drum unit came assembled. Upon installation I got a SC324-1 Error. Any ideas? The machine was not previously showing this error prior to the new drum &...
Hoping for some help. Any precautions/procedures for replacing the black drum & developer on a Ricoh MPC5503? Any SP resets before or prior? Filling in for a colleague and I am not too familiar with...
Rubber of the drawer, sorry I'm not sure what you mean by that. There is no roller in this particular tray, it's all on the bottom of the printer. This is occurring when making internal test prints.
No error messages, it just continues to rotate and try to pull paper. Yes, checked multiple times both the tray and for obstructions.
Multiple issues on a HP M451nw. First, the machine will not pick up from tray 2, just a constant rotating clicking sound. I replaced both rollers, no change. I put paper in bypass tray 1 to isolate...
Have a bizhub 283 in the field, it will not print envelopes in the bypass, it does not seem to be detecting envelopes when set in the bypass tray. I set the bypass tray manually to the envelope paper...
Have a HP P4515 that is stumping me. When I go to print test pages from the menu, it will feed pages but they come out blank. I have repaired the sticky solenoid tried a different toner cartridge....
Went out on a call for a bizhub 282 witha C0208 error. Found this piece laying inside the machine. Can anyone help identify? Would this be causing this error?54192
Went on a call for a C0208 error and found this piece laying in the machine. Can anyone help identity it? Would this be causing the error?54191