Search:

I think the value F3 is 0,5A (I'm not sure)

Check Laser unit and DC Controller.Check Fuse on the DC Controller

That's a carrier (shaft) that keeps belt
I think the device is a not completely flat (little skewed), belt assembly is very soft and therefore this problem.
Sorry for my English

I'm changing everything written Dan777 and in the end I decided the problem by adjusting the I sent you

I have this problem.On the left side has screw for adjusment belt.
Sorry for my english
Regards
33037

I think not. Try again next week.

I know for generation 2, the problem was in AMS, on IR is default off.Now I have a problem with roles.When I set user limits for color copy and print,copy work only bw bat print work color and bw...

Hi,
I installed the ULM and when I want to fill the Roles writes that feature is not available

I have this problem. Problem is in the duplex clutch

I think a carriage unit and flex cable is ok because work correct in Service Mode :confused:

Hello everyone
I have a problem with IPF 755
When you switch the device on a complete BK ink spills in MC. In SM I can print reports and nozzle check and all is ok :confused: .
Firmware is old...

Tray this
COPIER > ADJUST > DEVELOP> DE-OFST> Enter 25 (default 0)

I have this problem, right door actuator was distorted because the lover cap was broken.

Hello
Today I was try the device and works fine 500 copies,:confused:
I did the cleaning reader controller trough the device is OK
I'll report back if the problem of giving.
Regards

Thank you
I'll try tommorow and I'll answer
I suspect it's because it happens when the appliance is running multiple copies.When I enter 15 copy machine do the 9, 10 is not good and continued well...

Hello,
I have a weird problem with ir 2520. Device is working normally but sometimes turn copies of the duplication process.I install new firmware,replace cassette lock arm stopper :confused:
Any...

Parts number: Cable HY7-3434-000

21071

I have this problem.You must enter a new software but you have to have an adapter for it.Now I do not know the parts number for adapter I have to work tomorrow so I send you.
Sorry for my English...

If you have installed duplex unit press again duplex button.

In Europe is drum unit C-EXV 14 for Canon IR 2016, IR 2016I, IR 2016J, IR 2020, IR 2020I, IR 2318, IR 2318L, IR 2320, IR 2420, IR 2422.
C-EXV 14= GPR 18
Drum C-EXV 23 is for Canon iR2018, iR2022,...

for which the device is GRP26?

the difference is in the plastic.
changes plastic in the GPR 18 on GPR 25 or simply break the tooth

For print PDF you must buy licence

Use for upgrade firmware with USB Memory stick

Defective main controller PCB