Try replacing the wiring loom between duplex unit and main m/c.
Wires break due to opening and closing of r/h door.
Type: Posts; User: Gamut
Try replacing the wiring loom between duplex unit and main m/c.
Wires break due to opening and closing of r/h door.
Check usb connection between controller and operation panel.
"If I Clear printer memory (SP 5801-08) again, and perform the ACC , printer without scanning in the test pattern, everything is great.
I could probably leave it this way, but I want to solve this...
Bug in Firmware rewrites the default SP values for TD sensor.
Long process to resolve see Tech bulletin: RD074079 (UK)
Check if toner save enabled, affects copy but not so much print.
Same on all the SP's.
Suspect Black plastic "duct" missing from PCDU if you look at back of a colour unit you will see whats missing from your Black PCDU.
The stepper motor (D1364544) gets toner/dev dropped on it and goes bad.
This motor controls right hand rollers movement.
I had to go back a while later to replace the left hand side (sc515-01)...
2 types of sleeve did you fit mpc3002 by mistake?
As slimslob advised above you need @Remote connector for more than a 1000 devices.
Are you sure this is pro and not a basil box, as your 2nd image reveals 1-1000/1025 items showing
Which indicates to me you can only log max 1000 devices.
DC motor "on/off transfer" in main drive section (order gears as well).
First clean laser slit glass, a must do on these, then acc.
Rear PTR assembly hinge pin that large spring sits on is probably broken, modified assembly kit with metal pin is now used.
Did you find a solution to this impetus73?
Just out of customer with same issue, replaced HP sensors cleaned shafts and bushing still no go.
I agree with tension roller + springs and the little black cap things...
I think he's asking if a belt from another model will fit....
Try user tools/counter > printer features > list/test print > Config page, should be on that.
Is the dev carry over one end or all over?
Check toner supply is working correctly, yellow toner pumps seem to fail first, if density is low it will pull dev not toner.
Check corona wire is not...
Start by letting us know what you have done so far!
Only part number found relates to front lever, assuming both are same then B2234110
And Ricoh.co.uk
I'd be more than keen on anything that assists in resolving PITA scan to folder/mail setups on win7.
And Comms with WIM sounds interesting.
Picked on the wrong Guy there then........
"Dear Gamut,
Someone has tried to log into your account on Copytechnet.com with an incorrect password at least 5 times. This person has been prevented from attempting to login to your account for...
Turn off toner save, it has more affect in copy mode than print mode.