I did both the copy and print calibration. It did look better after doing that.
Type: Posts; User: big mike
I did both the copy and print calibration. It did look better after doing that.
Does anyone know where the NVM sheet is stored on the B80xx copiers?
I know the C80xx has it in the paper tray 1 storage pocket. The same for most other Xerox copiers. I need to adjust tray 2 side...
Thanks, that's good to know.
When replacing the OEM Xerox drum with a rebuilt unit, have you noticed how the units with light green have poor cq? On the market are light green, dark green, blue, and purple drums. Which ones work...
Thanks, I'll do it.
The C9065 fault history shows an error 29-717. My RAPS in the PWS and Searchlite don't show what it is.
It does have the efi icon on the UI and a card for a bustled controller. Is it a connection...
got it, was the top cooling fan was unplugged...
I have a C9065 that gives fault 43-376 during warm up. I didn't see it in my pws.
It's my first Primelink. At first, it gave 42-323 fault. K drum drive. I looked up the part number and saw it's...
I had the exact same problem with another C8055 dadf. When I pressed down on the top cover it worked fine. As these are getting older, the plastic isn't holding up. Is there a retrofit for the front...
It will feed a stack of 70-80 docs SEF, no problem. When I try a single LEF doc, it jams with fault 305-197 'Prohibit Combine Size Jam'. I've cleaned the sensors, rollers, checked the pads (one was...
I found it! In the browser go to:
copy
setup
manage user permissions
user permission roles
non-logged in user
edit
B/W only!
I got the files, not sure how to delete this post.
Does anyone have the two small C8070 swup files to share? I bought it with a missing a hard drive, have the full dlm, etc. It says 'can'r decrypt...'
When I use the document feeder and copy a document 8.5" x 7", it copies 5" and deletes the rest. These are letter size checks with the bottom third gone, a common item to copy. My customers will...
Thanks, but reloading the software will not make the copier print/copy b/w only. Right? She wants to use her C8055 to be a b/w only without letting anyone override the defaults to use color. If I...
A tech friend of mine was able to get it running properly. He tried the front usb, ended up using the usb on board, tried different usb drives, different hard drives, etc. He was able to load an...
I have a customer that wants to use their C8055 as a black/white copier and printer. I know you can set the copy for b/w (but it will do color if you select it). And the print driver can be set to...
I am trying the software.
61680
Select Image to disk, then select your compressed dlm... which one is it?
61681
I picked the top one and it want to select a drive to reload. It didn't select my...
When I tried it this morning, it would not load it. This has the swup files in the root.
61677
61678
I even tried it with the swup files moved to inside the Altboot folder. No luck. Perhaps I...
Thanks for the swup files! I will try it Monday.
Is the file size correct for sw#103.001.020.7000 = 493,291kb?
The copier shows system error shortly after it powers on. It still copies, scans, and prints ok. It tried reloading with a usb using altboot and with forced upgrade. It didn't load, just powered on....
I retried it and waited longer. It works like it should.
Thanks
Thanks, as long as the quality holds up, they are ok with that.
The last question, totally different topic but still Versant 80. The waste toner bottle prompts you to order a replacement, then...
I worked on a Versant 180 that ran 60k over the last 9 months. The drums were almost new then, and now they show 0% and OK. I replaced one and it now reads 100% like expected.
Is the something in...
When loading software with a USB onto a bustled controller, you power it off (disconnect the n/w cables, hdmi), flip dip switch on, insert the usb, power it on, correct? When I tried it, it never...