Hi
We removed slnx v2 from IMC 3500 from admin of slnx and pushed SafeQ.
But SafeQ from IM C 3500 display panel showing connecting to SafeQ server.
Want to know which SP need to disable which...
Type: Posts; User: jsr123
Hi
We removed slnx v2 from IMC 3500 from admin of slnx and pushed SafeQ.
But SafeQ from IM C 3500 display panel showing connecting to SafeQ server.
Want to know which SP need to disable which...
Hi
We removed slnx v2 from IMC 3500 from admin of slnx and pushed SafeQ.
But SafeQ from IM C 3500 display panel showing connecting to SafeQ server.
Want to know which SP need to disable which...
hi
While accessing address book from from scanner add new user reverting me with message PROCESSING HAS FAILED.
From setting address book also not accessible even from web also add new user no...
Hi
My customer SPC 360 SNw have no display only power green light is there.
Is this a display problem or power supply. Can help please.......
Thanks
Hi
IM C4500 from machine user tool supervisor login without password OK but same from web portal not login.
Returning with password mismatch. Admin login without password from machine as well web...
Dear All
Four new SPC 360SF error code sc 332-01/02/03 continue.
Replace with new toner still after few prints error return.
One machine stuck with sc 332-03 add yellow toner.
No blockage at...
Which motor. In DF Unit or drive side. Where ???
Dear All
MP - 7502 while copying from DF leading edge shifting. As per bottom edge also shifting.
sample copy attached for reference. From user tools edit margins set to all four zero. And...
Dear All
one of MPC 2011 keeps on flashing red light within intervals on two to five minutes
for write side / duplex door open and with three seconds becoming normal again.
This keeps on...
My mp 2352sp while copying from glass and no DF connected. Two tray only loaded with
A4 paper and in auto paper tray slect mode. Once performing copy from glass A4 size
message appearing load paper...
Hello Sir
I just installed new MPC 4502 which is PS ready machine.
Installed driver over Mac OS 10.6. I installed correct driver.
Once give print job, printer indicator blinks but no print out....