Moist paper or the client is lying and didn't set up thick paper correctly.
Type: Posts; User: Kapral
Moist paper or the client is lying and didn't set up thick paper correctly.
Sorry for resurrecting this zombie of a thread, but i have quite an interesting thing to share, since i've encountered very similar problem and i was fighting it since last week.
I had this...
Oh, as far as i know, our color production models never stop, just show that this-and-this part has to be replaced. But in service mode You can check the counters for each part, have You tried to...
I'm not sure You understand me right. You go into Service Mode, then Counter, then Maintenance. And You set the maintenance count to be, for example, 30k copies. It counts 30k and then it stops. Can...
Thanks, it was somewhat helpful. But there was a possibility in older machines, that just the maintenance counter could stop the machine. Can this be done now, with newer?
I think he wants the machine to stop after reaching drum life limit.
AFAIK DV411 should work in these machines. I have to ask my buddy tho to be certain.
Hey Folks!
I have a question about the maintenance counter and the possibility of setting the machine up in a way, so (like in the older models) it will stop printing when reaching certain point,...
Yeah, but no.
That's an ftp server running in local network. For mfp to scan directly to client pc folder.
Quite an optimist, aren't You pal?
Imagine a small company, three employees or so,...
Animation guide is a cosmetic feature that allows You to show how to remove jammed paper as an animation. I can send it to You, but not today, cause it's midnight here ;D.
On the infohub. Did You replace the disk?
Yes, if the disk is corrupted enough, it won't be of any harm if You just turn the machine off.
If hdd is dead or dying, try logical, then physical. If nothing works, replace hdd and do only logical format. You can take whatever disk You want, it doesn't have to be from the same machine, just...
Any specific or just new-ish firmware?
With Windows "home" version it's quite difficult to make that work for a long run. I also prefer ftp, and as mentioned by someone above - i use Filezilla ftp server. It runs very well.
For many machines i had no problem using Win10 driver for Win11, but i know that C3850FS is an awkward one. Try and use Universal PCL V4 (or whatever it's called).
I have the same problem in one of my C308's. I've downloaded mass production firmware, that should (in theory) correct this problem, but it didn't - perhaps because D011 code appeared a few times...
Did You even read my post?
I want them to be mixed, but the copier, with mixed originals and the function mixed orginals on, won't do mixed originals. It scans everything as A3.
I'm selecting "Different width".
What ADF runup procedure? These machines come with ADF (dual scan) as standard.
Hello!
I've searched the forums and some guys had similar problem, but no fix.
I have a single C554e machine, that when scanning or copying mixed originals (with mixed originals mode on, of...
Problem solved, turned out their it guy didn't really know what he was doing and turn on authorization, account track and id&print, couldn't configure it properly and it all went bananas.
A...
Hey there,
I've encountered odd problem with C454e - it's set up to scan to email, and it used to work without any problems, but recently they've changed the company policy and require the users to...
I obviously know, that one can do that, but that's not the solution in this case, because client is kind of sensitive about his devices, since one time he had a major power surge and lost a few...
You might have a major problem. We've tried nvram recovery in many smaller machines, and after initial setup procedure, followed step by step, those lines always disappeared. BUT. We've tried that a...
Hello,
one of my clients has a Bizhub C552 machine with Fiery controller. The controller powers up automatically, when the machine is turned on using main switch.
Not so long ago we've installed...