Hi yes I did
Type: Posts; User: lenovos
Hi yes I did
Update I replaced the power board on the right side of the printer, It seems to have fixed it. I had a 9340 on the shelf and they appear to be the same board.
Thanks
i HAVE REPLACED DRUMS AND CLEANED TONER AND DRUM AREA. i AM A SHARP AND HP TECH MOSTLEY.
i GOT MESSAGE TO CLEAR ONCE BUT IT RETURNED A FEW DAYS LATER. Also customer uses oem toner.
I have...
Thank you I will try that.
I have noticed on a few of these copiers are noisy or growl when they feed paper. It does not seem to cause a problem and customers are not complaining but it bothers me. On one copier messing with...
Try reseating your boards and connectors. Also disconnect network cable and reboot copier. Do the second one first.
Might be time to upgrade to a AR-M257
Tried that and did not help. A friend suggested swapping hard drives and that solved most of the problem. Everything seems to work but it still says bundle 000000000000 under firmware version. ...
Update reformatting hard drive solved most of the problems. can now print and use settings on display.
I had a clone go bad and I have a little bit of a problem with a MX-3070v. Something must have been corrupt the first time that I tried it. The copier boots up and I can make copies but I cannot...
Harbor Freight
Has anyone had any problems with the stepping motors? I have two with the same code. I don't think that they could have made the sensor any harder to get to. In simulation 3-3 it clicks once...
Send them a bill for 1000.00. Explain all your grievances. Then wait and see.
Look at the tech bulletin on how to Initialize Password and service Password.
You also have to send a request to Sharp for the Key.
I have heard that you can clone a similar copier , but I have...
Hi thanks for your fast reply. I was able to access panel with sim 26-3 , tap vender ex. and I can now start password reset.
Thanks for all of your help.
Copier has message on a big white screen that says could not access the accounting server. Passwords have been changed, Is their anyway to forcibly get rid of the first message? The way that...
thank you this was helpful
Mine gives a 3000 error after I print off a Machine Status list With out doing anything if I print it a second time the error goes away.
I did run a 62-3 and I also formatted the hard drive ...
I have a 3070 in the shop that came up with a 3000. When I powered the copier down it did not return. Since the copier is in the shop I decided to run a 62-3. I normally I just format. So wish...
From analog to digital 30 years plus. Starting selling off lease liquid savins and lived to talk it!
I checked log and my code is a F2-49
Thank you
Thank you I too have the same thing. F2 on MX 2600 no sub code. I did not think about 22-4 Da me bad.
Appreciate you mentioning error log.
If I do that will wipe everything thats on the machine. Would you replace power supply first?
Thanks
Good morning I have a Kyocera FS-3140 that has a c6000 error. I have swapped the fuser unit with a known working one and it still errors out.
I was wondering if I was missing a reset. I googled...