Search:

You might try 906'n it. It may not help but it won't hurt either.

Sounds like you need a good priest.

I've seen this multiple times. the first time I saw it took me a bit of time to figure out but it was the DV unit. No matter how much I cleaned it and surrounding components I couldn't keep it from...

I loosen it one notch, which is all the way.

1st. Is the machine set to auto detect the paper size or is it set to LTRr in the system menu. Either way what size is indicated on the event log vs what is actually in cassette? I had one the other...

I have a number of those machines as well. I am curious where you are getting the rollers.

Assuming it is not too late already. I had a 3655 a few years ago that needed a NV ram and I was told it is the only part I can not get for the machine. Unfortunate, but I was able to use it for...

Good work. It's tough sometimes to let yourself admit that the brand new part might be faulty. Sadly it happens more and more on these older models and in many cases you may be replacing the drum or...

Good job.

Not that I know of. However if some one can make it happen I would love to know how.
I've had to do it just as you described several times.

I'm not familiar with this model. If it is like a TA3252, TA3552 or a TA4002 it will have a drum DLP connect PWB that the drum and developer plug into. It can be found in the parts catalog in frame...

Non ho idea.

I have to wonder what the test page looks like. If it is okay for the first half and poor on the second half you have a fuser issue.

We had a case with an ECOSYS M3655 that seems a lot like this. Randomly would fail and randomly just start working again, making you think you fixed it.
As it turned out there was a bushing, white...

Clean the scan glass well and check the DP for debris in the path that may be getting pushed onto the scan glass and then retract after the process. I have seen it happen and if I had not I would not...

As mentioned above samples would be helpful. I can say this, I have had knock down, drag out, round after round fights with the charge roller on this and other machines similar to it. I clean them...

I have had this problem to the point of insanity. I have found setting all the registrations, magnifications and margins helps very much. I will go in order: U034, U65, U66, U67, U70, U71, U72, U402,...

I believe it is an option.

I feel your pain. Here is the thread from about a month ago. Good luck.
M5526 transfer cleaner clog and stripped gear

It's been a while since I've worked on one of these but I think WTS2 reads the height of the bladder on top of the waste tank. When it bulges it presses a lever that engages or disengages WTS2.
I...

I'm not trying to be insulting here, but are you sure it is the correct toner for the TA3212? Meaning is it TK-7127 and not TK-7107? I'm not even sure the TK-7107 would fit into the 3212 but if it...

I got 4th place in the Western Region.

Sounds like the back up battery on the main board is probably dead. You could try to reset the error with sim 906 it and see if the same error occurs. If it does I would think the battery would be...

Yeah, I got a 74.

We had a similar case a few months ago that stumped us for quite a long time. As it turned out the levering system on the fuser had come partly undone and some times one of the rods would be pushed...