Search:

Hello, did you solve the problem? I have the same problem with FS-534

Hi, I don't know if this will be relevant to the topic, but I wanted to share something great that I just found out. We bought second hand Bizhub 4700p to enter our clients fleet, but some of them...

WOW, thanks a lot!!! It worked, that's amazing. Do you drink wiskey?

Hi, jotunn

Thanks a lot for helping. Im attaching a picture of a label with the serial number. If this works I will try finding a lexmark account throgh the local dealers of Lexmark
60688

Hi, all.
We have an epidemy on our hands. 9 or 10 printers of the same model - Bizhub 4700p died with the same problem. It does not recognize the toner cartridges saying "unknown cartridge" and the...

Hi, we have installed about 50 machines on the field and found an easy solution for the background problem
Go to Utility - Machine Setting - [DENSITY(ADF)] and set it to Mode2

Just reporting for people who might have this problem in the future. It was exactly what xeroxsharp said. The flag was catching the edge of the photo sensor and didn't return to home position. I used...

The same setting with the same paper works on another machine.

OMG, thank you. Envelope setting works. No lines and the toner is well fused on a 250 gsm paper. A good work-around.
Still - what a puzzling problem. Maybe firmware issue?

Forgot to mention the problem has nothing to do with the paper used. I stopped the machine mid-print and took out the Transfer belt - the lines are present on the transfer belt itself. We can rule...

Today I took with me parts from a perfectly working machine
1. Transfer belt
2. Imaging Units - Y, M, C
3. PC motor YMC (M16)
4. Transfer belt motor (M1)
5. Developing motor/YMC (M17)
The...

Yes, I did that yesterday with no effect. I also did try with brand new transfer belt and drums.

There are vertical Cyan, Magenta and Yellow separate lines and before every line the color registration is a bit off. I happans only on tick paper and on bigger formats then A4. The 3 lines on the...

Hi, anybody have any solution? I have the same problem. Changed fusing unit and exit roller unit with no success

Hi, I have the same problem. Can you post the bulletin here?

Reporting that the fuser fits

Hi, have anyone tried it yet? I want to put my good working C3350 fuser in C3351 to see if a minor wrinkling on the paper is fixed.

Sorry to bring this topic back up, but the same jam code started to show up a 1050 I am servicing. I did change M12 and M15 motors. I did check all the paper sensors in the ADU and they are working. ...

That's a good idea. Maybe print 20 unprotected books and 1 whole protected book and than chose random pages to swap them manually.

The client knows how to print the book with a copy protection pattern on every page. His question is - Is it possible to put the pattern just on 1 of every 20 pages?

A client wants to protect a book from illegal copying. There is Copy Protect function in Konica Minolta drivers that works, but puts a gray background on the page. That will be OK for the client if...

The firmware version on my faulty machine is G00-38. So that highly recommend version by KM is also not good. I also noticed the TCR values for IU C started going up and are now at 11%. I guess it...

Hi, I had the same problem with Bizhub C3300i.
The client changed the yellow toner on around 800 total pages and after around 100 pages the yellow is empty again. The waste toner box was almost...

Thanks for your fast answers. I did find another machine to make tests. Turns out it was only the small board on the bridge unit that was fried - part # A2Y1H101

Hi,
The finisher was working fine attached to Bizhub 754. The client moved the machine to another place and on arrival I found the cables unplugged. After that the machine acts as if nothing is...