warm up noise :
gear teeth to teeth dirt in grove gear to gear did not match ,there is some distance between them
i took out fuser deliver drive assembly ,clean the teeth and gear motor rh7-1622...
Type: Posts; User: pc123321
warm up noise :
gear teeth to teeth dirt in grove gear to gear did not match ,there is some distance between them
i took out fuser deliver drive assembly ,clean the teeth and gear motor rh7-1622...
i hear the noise when warm up and check fuser jam removal a gear rg5-5700-0000cn
sensor bad burn
i try the way i could , i only have the service manual 5687 ,i took out tray 1 and tray 2 feed assembly ,there is an paper feed sensor,and paper high and no paper sensor ,only one on the back maybe...
thanks for your reply
this is no concern with platen glass ,because this business card file shown on my computer is perfect and then sent it to riso rz 390, via local network, and test print, i...
it is the machine design error
only one screw one one side ,this gear turn back and forth to overcome the spring load at end via cam,
i have this case one year ago , find part ,,,
i found the...
the line first print from xerox wc pro 35
this is the check riso rz 390 output 11"inch for input leading edge
we found that the image skew , the right hand side(bottom) image are higer than left...
why always magenta drum has the problem ?
i disassembly the magenta drum i found that upper brush and downbrush
the toner left on the brush is uneven , near side me is much more magenta toner...
developer ?
itb belt take out the belt and clean 4 roller
after clean ibt belt then it working
after that the pg 10 test shown
this is c3220 pg10 test
any advice are welcome
thanks
this is the secondar transfer external roller under the ibt belt
because secondary transfer roller outside has a film of toner , so on the printout paper can see the magenta toner
imaging unit of drum upstream brush or downstream brush problem ?
or something...
problem find itb belt left side handle drive roller shaft bent
this is canon c3220
here is photo printed
any advice or recommend are welcome
thanks
My test page just came out looking like this 2383323834
The yellow is faded what would cause this
pc output
understood
what kind of lever canon copier for printing
bought at august this year only 120 days drum life 64
auto gradation adjustment heavy 1 full adjustment , paper select glossy paper not heavy 1 before printing
this is the c3220 feature ?, why
or only my machine has this problem after drum life 50%
this is the c3220 feature ?, why
or only my machine has this problem after drum life 50%
print one side all image are normalpaper 11x17 i draw a rectangle 10 x 16when i print the other side left side top and bottom are matcha 1/16 inch difference right side top shorter than right side...
c3220 machine start up and warm up complete
a while screen go blank no information on the screen
why?
2263222633
two pics
left :print 11x17 paper
right one printout image missing
this is printing from xerox wc pro 35 11 x17 paper tray 1 and by-pass
paper input on short side 11
turn on xerox wc pro 35 machine initial , sensor motor noise not move scaner lamp off , initial...
sorry , this is my xerox wc pro 35 b &w
1. scaner error code 14-110 it say scaner sensor
sensor ccd board near j450 connector 3 resistors burn
scaner error caused any connection with image...