Search:

Type: Posts; User: copyman

Page 1 of 20 1 2 3 4

Search: Search took 0.09 seconds; generated 56 minute(s) ago.

  1. Replies
    9
    Views
    144

    Re: My bizhub c224e copier does not start.

    Sounds like SSD. If all else fails try reset firmware. A lot has been posted on this forum about this issue
  2. Replies
    7
    Views
    301

    Re: Selling a business???

    My business model has acutally gone the opposite direction the last several years. I've sold less service contracts and made more money with sales! Upgrading my exsisting customer base and a few new...
  3. Re: Realistic comparison between a heavy duty copier vs multiple light duty copier

    @copyman, in my area KM only offer biz C658/558/458. I believe they are the successor of 654e/554e. I might give them a call once this COVID issue ends. Thanks[/QUOTE]

    See if you can find low...
  4. Re: Realistic comparison between a heavy duty copier vs multiple light duty copier

    That is why I also hand pick low meter off lease but when I do replace the transfer belt or fuser I rebuild with aftermarket China parts. Both easy to rebuild and save a lot of $$$. Been getting same...
  5. Replies
    9
    Views
    253

    Re: user auth vs account track

    I thought with authenication you needed to add an accessory like a card or thumb reader, where account track can be done without any optional accessories?
  6. Replies
    3
    Views
    479

    Re: Biz C253 quality - color registration

    Ha-ha, Had to go back to 2017 records to see what I did.
    In this case it was the magenta image unit. The one I put in a few months before was rebuilt and didn't last! Back to OEM only with this...
  7. Re: Realistic comparison between a heavy duty copier vs multiple light duty copier

    The bias here is with good cause. There are many techs with many years of experience on this forum and they are going to always lean towards laser over inkjet. We have seen too many people burned...
  8. Re: Realistic comparison between a heavy duty copier vs multiple light duty copier

    Also not sure if it was mentioned (have some people blocked) but what about the ppm speed? That has to be factored in when discussing equip being in a print shop. Usually with a print shop speed =...
  9. Re: Realistic comparison between a heavy duty copier vs multiple light duty copier

    Many inkjet vs laser powder toner comparisons have been done and laser always wins in the long run. Most show a bigger laser unit will actually pay for itself in a few years with what you will save...
  10. Re: KonicaMinolta bizhub-40p Printer, MS-DOS driver

    If all else fails try using the HP 4 driver which is based on standard driver language. We've used this old driver on many old printers & copiers when no driver available. Only thing is you lose all...
  11. Replies
    5
    Views
    153

    Re: Bizhub C253 K toner port blocking

    Are you sure it's exclusive to the black. There is a known issue with the waste system getting blocked up and you are right the machine has to be torn down to get to it. It is such a big job many...
  12. Replies
    8
    Views
    373

    Re: General Questions on C3350

    Not sure if Kon/Min ever made a good all in one small box, color or B&W? Going way back to the PP1390, it was bad. Color was no better after all these years. Actually only AIO good model is the Biz...
  13. Replies
    3
    Views
    123

    Re: Konica Minolta Color Mismatch - Looks 3d?

    Any "P" codes? Usually when reg is off like that you will have "P" codes. Touch small oil can icon at bottom of screen to see.

    My guess is you may need a drum or two or maybe new transfer belt or...
  14. Replies
    8
    Views
    373

    Re: General Questions on C3350

    Same footprint as the C35!

    Light fuse, get away!
  15. Re: Konica c364e no servicer is registered contact your administrator

    Sorry you don't see my point. If you read "most" of my posts you will see my nature is to help people on this forum. But it comes to a point that's all that can be done.

    Just a suggestion, you...
  16. Re: Konica c364e no servicer is registered contact your administrator

    Wait let me get this right you want to save time but it's ok for us to waste our time trying to explain the soft switch procedure. How it usually works is a tech spends hours, trying everything...
  17. Replies
    10
    Views
    438

    Re: Bizhub Fuser Rebuilds

    Couldn't read what copier adDICK said but sure I din't miss anything:confused:

    Good question, I rarely change the bearings, etc depending on the clicks. Most of the time the fuser was no where...
  18. Re: Konica c364e no servicer is registered contact your administrator

    I agree. This is where it ends for me. You have been given some great support here, including the password to get into security mode! You will need a service manual to proceed. Change software...
  19. Replies
    10
    Views
    438

    Re: Bizhub Fuser Rebuilds

    Yes I've rebuilt many 4 series fusers, no 8 series yet. Much easier than the C253 fusers!

    Aftermarket China parts only. Copylite products out of FL sells everything needed to rebuild units, except...
  20. Re: Konica c364e no servicer is registered contact your administrator

    As my original post stated I figured you were talking about authencation mode. Had this same thing a while back and think it was a softswitch had to be changed.

    Check switch # 12 and make all 0's
  21. Replies
    4
    Views
    228

    Re: Bizhub c550 error c4501

    All I can think of is those ribbon cables for laser unit. If they are the same as a few other Kon/Min PH laser units I've changed the ribbon cables were tricky to seat properly. I would look at those...
  22. Re: Konica c364e no servicer is registered contact your administrator

    Think he means it was in defence dept and had authenication cards. You should be able to turn off in admin mode "authenication off" or if not showing because of higer security than you will have to...
  23. [Misc] Re: what chemicals are you using to clean one ways on KM units

    I seem to recall canon machine saying refurbished in Mex or something like that. And think I remember how nice and new they looked but didn't last long.

    Back in the day you could send covers away...
  24. [Misc] Re: what chemicals are you using to clean one ways on KM units

    Haha we are lucky to still be alive! Heck in the 60's we rode our bikes in the fog behind the DDT trucks that drove around the neighborhoods fogging for mosquitoes! Way before EPA was around.
  25. [Misc] Re: what chemicals are you using to clean one ways on KM units

    Good advice but have to disagree about "not" scuffing the shaft. Scuffing up the shaft with "scotch brite" pad only was even recommended to us by Kon/Min factory rep. Like the other poster said make...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4