Search:

Type: Posts; User: Keegan Chetty

Search: Search took 0.05 seconds.

  1. Replies
    22
    Views
    2,825

    MP301 PCU's failing constantly

    Hi all

    Just wanted to find out if anyone has had PCU's failing without reaching yield? for the past couple years now I've noticed this and we have easily replaced over 200 failed units with...
  2. Replies
    2
    Views
    1,157

    Ricoh SPC430 Special SP mode

    Hi everyone

    please could you assist, I need to get into special SP mode to change the display serial number on this machine, normal SP doesn't allow me to string in the display and now it gives...
  3. Replies
    12
    Views
    668

    Re: SP8200DN cannot print double sided

    Ok guys, I have tried everything you all suggested, I changed the RAM, put a 256Mb ram. I did an output check on every part in the duplex unit, it is all working. Spooling is off by default, frame...
  4. Replies
    12
    Views
    668

    Re: SP8200DN cannot print double sided

    Thank you guys for the feedback, I will try all this tomorrow and give you feedback on what the problem was, much appreciated!
  5. Replies
    12
    Views
    668

    Re: SP8200DN cannot print double sided

    it does have a hard drive
  6. Replies
    12
    Views
    668

    SP8200DN cannot print double sided

    Hi guys

    This is probably an easy one but I'm not too clued up with this model. I can't print double sided on this machine, the configuration page says that the duplex is unavailable. There is a...
  7. Thread: Robob

    by Keegan Chetty
    Replies
    5
    Views
    598

    Re: Robob

    I've had a similar problem when I did a refurb on a 6001. The web motor wasn't turning, the reason was that the gears on the web were all damaged and after I replaced it, it was perfect, also the web...
  8. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    No it couldn't be factory because the machine came from another client of ours, probably another tech or it could even be the client
  9. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    Hi, no it was the cable that connects the BICU and laser unit, there was a wire that was broken on that cable.
  10. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    True, I had a problem with a MP171 where the laser wasn't properly connected and it popped up an SC code, I guess the 301 is different.
  11. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    Finally!!! The problem was a broken cable that connects to the laser, even though no SC code popped up, it caused the machine to stay in warm up mode, I guess the couldn't pick up the laser. thank...
  12. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    Yes, I have tried that but it makes no difference
  13. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    I was wrong about the fuser, I have checked with a working machine and it does the same thing, I guess I was just too slow in checking the heat.
  14. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    Thermistor pins and connecters are perfect, I have one last thing to try, check all the pins on the BICU, maybe one pin broke somewhere or maybe there is a broken cable somewhere, I have no more...
  15. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    hahaha that's just it, I did touch the hot roller right away, I opened the guide at the front and touched it, but it was cold. I am currently using all 3 fuser units and building one perfect one, if...
  16. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    I have, I saw the temperature rising and the lamp coming on and going off, but when I took the fuser out I touched the hot roller and it wasn't even warm! I even changed the door but still nothing,...
  17. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    It is really odd, SP mode was correct, I saw the temperature moving up, I have changed the NV ram on the controller and the BICU board, I tried it with the original machine's NV ram as well as the...
  18. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    I tried changing the memory but still nothing, also tried clearing the memory in SP mode but still nothing. I checked the temperature of the fuser on SP mode and it shows me that the fuser is at 161...
  19. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    I'm puzzled guys, I have basically changed every part in the machine, Controller with the original NV RAM and with the machine NV RAM, fuser, BICU, High voltage board, power supply, fuser, PCU, side...
  20. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    No luck with the power supply either :confused::confused::confused: now I've got an SC542 to deal with as well, cleared it but I know it will come up again. Changed the fuser again but nothing also.
  21. Replies
    29
    Views
    3,287

    Re: Ricoh Aficio MP301SPF not warming up

    Nope, this one has no hard drive, I'm just changing the power supply now, that could be the cause.
  22. Replies
    29
    Views
    3,287

    Ricoh Aficio MP301SPF not warming up

    Hi guys,

    Please could you assist, I have a problem with a MP301, as soon as I switch it on it shows that it is warming up and keeps saying please wait, I cannot make copies or even print out a...
  23. Replies
    3
    Views
    767

    Re: Ricoh MPC3001 cannot scan to email

    Thanks for the feedback guys, not sure what happened. I just removed the IP and added again and it started working.:confused::confused::confused:
  24. Replies
    3
    Views
    767

    Ricoh MPC3001 cannot scan to email

    Good day,

    please can someone assist me, I am trying to scan to email but it does not seem to work, It has been working yesterday but this morning it stopped and gives me a transmission error. I...
  25. Replies
    6
    Views
    459

    New Workshop Engineer

    Hi guys, My name is Keegan Chetty and I have just started in the workshop working on Ricoh, Samsung and HP machines. I have only worked on Ricoh so far but I am enjoying it. The posts are really...
Results 1 to 25 of 25