Search:

Type: Posts; User: Doug James

Page 1 of 20 1 2 3 4

Search: Search took 0.31 seconds.

  1. [CQ] Re: Taskalpha 4550ci Intermittent lines on part of page every now and then

    Sorry LEF....Hmmm, I will put a new drum in it and see what happens... Thanks so much !!!
  2. [CQ] Taskalpha 4550ci Intermittent lines on part of page every now and then

    It's very weired, occasionally the copier will spit out a copy of lines on part of the copy. It's not part of a previous print job, it's just lines. The copier has about 150K. Not sure where to even...
  3. Replies
    7
    Views
    929

    [CQ] Re: TA 4551ci Magenta Background

    I ended up putting another DV and Image unit in it with brand new charge roller and so far so good. Thanks so much for your response !!
  4. Replies
    7
    Views
    929

    [CQ] Re: TA 4551ci Magenta Background

    Thanks so much !!
  5. Replies
    7
    Views
    929

    [CQ] Re: TA 4551ci Magenta Background

    Thanks so much !! I was wondering if it was something like that... Is there anything I can do to prevent the arcing. I have about 30 of these machines in the field... Kinda freaked me out when it...
  6. Replies
    7
    Views
    929

    [CQ] TA 4551ci Magenta Background

    Hello, This machine has been running great for a month after my selling it to the customer. Out of the "clear blue sky" it started doing this... (see attached)45022 Puts a red background on copies or...
  7. Replies
    5
    Views
    785

    Re: HP, Lexmark Printer Parts

    [/QUOTE] I have ordered from you guys before, I will give it a go. Thanks so much !!!
  8. Replies
    5
    Views
    785

    Re: HP, Lexmark Printer Parts

    I have been using Liberty Parts for several years now. Lately I have been shuffled around to several different sales reps and several mistakes have been made on my orders. Also I have been spot...
  9. Replies
    5
    Views
    785

    Re: HP, Lexmark Printer Parts

    I have been using Liberty Parts for several years now. Lately I have been shuffled around to several different sales reps and several mistakes have been made on my orders. Also I have been spot...
  10. Replies
    5
    Views
    785

    HP, Lexmark Printer Parts

    Hello All, Does anyone have a good place to buy wholesale HP and Lexmark and Printer parts and tech support. Thanks so much for any help !!!
  11. [Misc] Re: Can the Taskalpha 4551 Email me when it needs toner

    Thanks so much !!! A huge help !!!
  12. [Misc] Can the Taskalpha 4551 Email me when it needs toner

    I have a large customer that is wanting me to also address there toner needs which I do not normally do. Can the Taskalpha 4551ci email me when the machine needs toner. I know that engineers of...
  13. [Dead] Re: HP Laserjet 600 M602 Dead Machine Control Display lit and fan running. Was fine..

    Well after Blood Sweat an Alot of tears I found the problem. The Stop button was stuck in the down position. So if anyone else is going nuts trying to figure this out. Check the buttons....
  14. [Dead] Re: HP Laserjet 600 M602 Dead Machine Control Display lit and fan running. Was fine..

    The ready, Data and attention lights won't come on... I may have to get another formatter board... Thanks so much for you response..
  15. [Dead] Re: HP Laserjet 600 M602 Dead Machine Control Display lit and fan running. Was fine..

    Well I bought a new formatter board and it stated to come up then error'ed a 33.02.01 Used board and disk installed (It was used). I started to trouble shoot that then it went back to the way it was...
  16. [CQ] Re: Lexmark X466 Photoreceptor Waste sump full on new cartridge ?

    I'm with you... There is something funny goin on !!! Thanks so much for your response !!
  17. [Misc] Ecosys M6630 Squeeking Noise coming from Fuser Area

    This machine has 35K copies. They run alot of envelopes so I am just assuming the squeeks are coming from the fuser. Is this a common problem or do the black drum units have this issue also (I just...
  18. [Dead] Re: HP Laserjet 600 M602 Dead Machine Control Display lit and fan running. Was fine..

    I gave that a try, it's still doing the same thing. I believe that it is that type of issue though. Thanks so much for your response...
  19. [Dead] HP Laserjet 600 M602 Dead Machine Control Display lit and fan running. Was fine....

    I went to my account and picked up a machine that was running fine (Frequent Jams). I took it to my shop and it sat for a week or so. When I turned the control Display lit up, a fan came on and...
  20. [CQ] Re: Lexmark X466 Photoreceptor Waste sump full on new cartridge ?

    The other toner cartridges they had were from Lexmark in unopened boxes but that seems to me also the only way toner would fill the waste sump...
  21. [CQ] Lexmark X466 Photoreceptor Waste sump full on new cartridge ?

    I have a customer who is getting copy quality problems because the waste sump is full on the drum cartridge. The customer swears that they just installed it and got it from Lexmark. (It does look new...
  22. [Jamming] LJ E 700 MFP M775z ADF Pick Error 31.13.01

    When you hit start the adf roller will make a noise. Sometimes it will come down to the paper to try to pick it up, sometimes not. I removed the back cover and observed the motors and they seem to be...
  23. [CQ] Re: Kyocera TA 3550ci Lower half of Color Copy Black not fusing

    That's GREAT stuff Thanks so much !!!!
  24. [CQ] Re: Kyocera TA 3550ci Lower half of Color Copy Black not fusing

    Turned out I had to call Kyocera Support. The problem was a media issue. The setting for "plain paper" has 3 options. Normal 1, 2 and 3. The setting was at normal 1. Well the default setting is...
  25. [CQ] Kyocera TA 3550ci Lower half of Color Copy Black not fusing

    Weird problem, A solid black copy from test target copies GREAT. When I do a color copy off test target the black doesn't fuse. Put a Brand New Fuser in it and no effect. I also installed a right...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4