Search:

Type: Posts; User: Riviera

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    619

    Re: Oce plotwave 360 dead machine

    [QUOTE=Quatro;1647931]it was working before?[/QUOTE
    The machine was working one day and when I got to it it was dead. All the symptoms Iíve explain are the symptoms a had since the first time I...
  2. Replies
    6
    Views
    619

    Re: Oce plotwave 360 dead machine

    Nothing happening on control panel. It’s blank. When you power on machine the only sign of life is the soft switch blinking and you hear the relay above the power supply trigger then after 30...
  3. Replies
    6
    Views
    619

    Re: Oce plotwave 360 dead machine

    Thanks for that info. But what do you mean put the monitor in controller?Also the HDD doesnít come on Iím not sure of sequence and itís not getting power What do I need to do to reload SS ? I...
  4. Replies
    6
    Views
    619

    Oce plotwave 360 dead machine

    I got an Oce plotwave 360 thatís has no life except for the soft power switch blinking, and leds on the spider board. I have no access to service manuals so Iím goin in blind. On the regulated ps I...
  5. Replies
    0
    Views
    335

    Oce plotwave 300 part numbe

    Can Somebody help me with the part numbers for the oce plotwave 300 thermistors and the part number for the entire fuser thank you so much I appreciate it
  6. Oce 300 plotterwave fuser error and jam error

    Customer is getting an Error related to problem with fuser They didnít write down code but were told it was a fuser error. I got there and it was in a fuser jam error. Cleaned fuser entrance paper...
  7. Replies
    6
    Views
    1,180

    Ricoh MP 2554 shows copying forever

    Machine comes ready to hit the copy button it says copying and doesnít do anything else. Every so often a copy will come out but it keeps saying copying even after the document comes out if you try...
  8. KM Bizhub C353 page coming out tinted yellow when doing color prints/copies

    All color units installed less then 10k and 4 months ago. Customer says the tinting started soon after but only recently called. I suspect yellow is over toning.? Is there anyway to correct with...
  9. Replies
    8
    Views
    600

    Re: BIZHUB C452 FIRM WARE

    Iím not sure if hat version firmware is in machine. This is my first time working on it. Iíll check that and update if necessary. But at this point. Machine says ready to copy. No repl imaging units...
  10. Replies
    8
    Views
    600

    Re: BIZHUB C452 FIRM WARE

    Iím not sure if hat version firmware is in machine. This is my first time working on it. Iíll check that and update if necessary. But at this point. Machine says ready to copy. No repl imaging units...
  11. Replies
    8
    Views
    600

    Re: BIZHUB C452 FIRM WARE

    i meant a wire with a connector
  12. Replies
    8
    Views
    600

    Re: BIZHUB C452 FIRM WARE

    Thatís the issue. There is a spot in the imaging units behind the cover where I can clearly see a spot that the chips would go. But there isnít any there nor is there a word assume with a plug to...
  13. Replies
    8
    Views
    600

    Re: BIZHUB C452 FIRM WARE

    How do I reset drum count? I have the chips but there is no wiring in imaging unit to plug them into?
  14. Replies
    8
    Views
    600

    BIZHUB C452 FIRM WARE

    Im getting l 1 l 2 and l3 code
    e after setting soft switch 51 and 55 to extend drum life. The imaging units do not have chips in them or the wiring to connect them too .I assume they are original?...
  15. Replies
    2
    Views
    2,203

    wc 7225 Admin Password forgotten

    Ihave a customer who has forgottin their admin password. It hasnt been a problem till now. I had to chang printer controller and hd. Now i need to input network settings.Can any one help with a...
  16. Replies
    9
    Views
    1,840

    Re: Bizhub 951 pro error 2412

    so now I have everything turning ,ill make sure all toner removed from hoppers reset 3-1 to 0 power down/up put fresh bottle in and be good to go thanks for taking the time on a Saturday to answer...
  17. Replies
    9
    Views
    1,840

    Re: Bizhub 951 pro error 2412

    Thanks so much Lee . I actually did reset that , but im not sure i did it right ? I found dip switch 3-1 entered 0 and turned machine off then back on? Did i miss a step? II guess the code isn't...
  18. Replies
    9
    Views
    1,840

    Re: Bizhub 951 pro error 2412

    thanks to everyone who answerd. UPDATE. customer was outta country till this week. I went back vacuumed everthing including tubes. Changed and calibrated dv. Ran 50 copies or so all good. went...
  19. Replies
    9
    Views
    1,840

    Bizhub 951 pro error 2412

    Customer asked me to look at his 951 . I take care of his Canons. According to him , The wrong tyoner was out in machine. He had someone come out and clean out developer unit and replace developer...
  20. Epson F2000 White ink clogged Anyone know any tricks to unclog without repl print hea

    customer stored printer 3 months and white clogged. I know he can put cleaning solution in machine to try n unclog but is there any other way manually to unclog
  21. Replies
    0
    Views
    1,152

    Oce Colorwave 300 Service Manuasl

    Im getting error 4531 when machine calibrates or prints in color. Cant find code anywhere. Customer just bought used so I need to have manual . thanks
  22. Kyocera Taskalfa 3500 Developer unit needed

    I need a Dev cylinder or unit for the Taskalfa 3500
  23. Kyocera 420i switch acuator for registration roller

    I need part number for the actuator in vertical path. And spring. They mount to switch mount holder. There is two in side door
  24. Kyocera 5035 vertical path sensor (switch) actuator

    Looking for part number for the arm(actuator)and spring of the sensor in left hand door on Kyocera 5035. There are two of them , one each above each cassette entrance. Looks like it is for several...
  25. Replies
    6
    Views
    2,024

    Re: OKI DATA CX3535 Firmware needed

    yes still need.
Results 1 to 25 of 64
Page 1 of 3 1 2 3