Search:

Type: Posts; User: occus

Page 1 of 9 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    0
    Views
    150

    C-D010 bizhub C250i

    If someone have this problem.

    C-D010 machine boots up and you have maybe 2-3 seconds time to see the normal display and after you get the error.

    As soon as the error is displayed, nothing...
  2. Replies
    26
    Views
    1,790

    Re: I-Series storage board & boot problem.

    I didn't quite understand whether you formatted the old storage board or used a new one.
    If you are using a new one, I wonder if it has to be a certain type.

    Thank you for feedback.
  3. Replies
    9
    Views
    513

    Re: Konica vs Lexmark

    I have never heard of it... but of course if you look on the photo the left or the right machine side that is a KM basic...
    5002750026

    Lexmark CX921
  4. Replies
    1
    Views
    223

    [Jamming] Re: Bizhub c368 jam code 32-05

    Today i had bizhub c308 with 32-05 but this code is in relation with the paper exit sensor.
    In my case it was the exit path solenoid/ position of the reversal guide. I added a spacer.
  5. Replies
    39
    Views
    1,994

    Re: C3320i and fan noise, even in sleep mode

    I wrote to change the fan is not the solution. :)
  6. Replies
    39
    Views
    1,994

    Re: C3320i and fan noise, even in sleep mode

    In my case the fan stops in deep standby with default of the box settings. It is only a problem in a silent enviroment and the customer is sitting near the device.
    I have changed the fan with a cpu...
  7. Replies
    39
    Views
    1,994

    Re: C3320i and fan noise, even in sleep mode

    Yes it is true this series 3320i/3350i/4050i have a noisy fan for the cpu. I asked KM if there was a solution, but there wasn't one.
  8. Replies
    5
    Views
    520

    Re: Bizhub c250i squeaking noise

    Check other posts here and the paper exit drive
  9. Re: konica minolta c360i tray one jam code 1105 also internal error erratic code

    A tech tells me from this paperjam 1 tray problem on a new i machine... he has changed the whole pickup and the clutch cl10 but it was not the solution.
    Special thing the machine makes a cleaning...
  10. Replies
    6
    Views
    682

    Re: i series color vs E series color

    And don't forgett to make the gradation adjustment after change the switch! if you want see any change...
  11. Replies
    10
    Views
    737

    Re: C250i tick tick tick at idle demo and cause

    The space that i have fixed is not in relation with any other gear then the metal motor gear so i can't imaging, there is no reason not to try this modification.
    Last friday i found out if you press...
  12. Replies
    10
    Views
    737

    Re: C250i tick tick tick at idle demo and cause

    After a test of 3'000 papers in testmode the drive gear is still silent.

    If you look at the detail metall motor gear and spaced plastik gear, this picture is before i put in the washers

    48471
    ...
  13. Replies
    10
    Views
    737

    Re: C250i tick tick tick at idle demo and cause

    Ok, its done...
    Do not replace with a new drive gear. In my case i made a modification.
    If you make it for the first time calculate with 60min its really tight. And after i think you need about...
  14. Replies
    10
    Views
    737

    Re: C250i tick tick tick at idle demo and cause

    @EarthKmTech

    Do you have a solution?
    I have replaced the drive gear assembly but the ticking sound is still there... now a bit louder whit the new one...
  15. Replies
    4
    Views
    354

    Re: iSeries drum life

    I've already seen both. Drum black with 180k and with 60k for replacement (bizhub c250i)
  16. Replies
    17
    Views
    1,101

    Re: Broken C250i operator panel + paper exit noise

    Tick tick tick... i know it... have already ordered a fusing drive assembly for monday.

    @EarthKmTech how long does it take for exchange?
    (edit: sorry i saw your separat thread to late)
  17. Replies
    17
    Views
    1,101

    Re: Broken C250i operator panel + paper exit noise

    Hi Bix

    I told you the last time it comes from the exit drive... but of course everything ist possible. Had a lot of this squeeking machines...
    Open the side door and remove the small belt from...
  18. Replies
    26
    Views
    963

    Re: Reboot Olivetti d-Color MF282plus

    48215
    48214

    Bix, do you have a new SSD with green Dot? (with 6.05 already installed?)
    Have a look in the troubleshooting guide.

    If you can't install the firmware i think it is not possible to...
  19. Replies
    26
    Views
    963

    Re: Reboot Olivetti d-Color MF282plus

    Was it possible to load a firmware after replacement? Try reseat SSD.
  20. Replies
    26
    Views
    963

    Re: Reboot Olivetti d-Color MF282plus

    Yes, plus means (e)nhanced.
    Try the KM fimware, but it happened once that it didn't work, it depends on the firmware version. Then software switch 10 from 04(generic Brand) to 01(KM)
  21. Re: Bizhub c224e problem "Serial number must be entered" -> "TPM Chip has been change

    I know there is a firmware GHV-M1 to fix that problem (DLBT1810973EN_0)

    The following issues are solved in this firmware.



    After turning OFF/ON the Main Power, the entry screen of serial...
  22. Replies
    26
    Views
    963

    Re: Reboot Olivetti d-Color MF282plus

    No, you can use a old one!
    Replace and put in usbstick with newest firmware on first boot. Most time it works, sometimes you need a clear all data.
  23. Replies
    26
    Views
    963

    Re: Reboot Olivetti d-Color MF282plus

    Yes, change the SSD. I replaced a few last year, even with the controller firmware fix installed...
    Sometimes you need a total clear and Moviedata after replacing it, if you get a SSD error.
  24. Replies
    13
    Views
    1,294

    Re: Bizhub C250i Fuser noise

    Yes, i had this several times on 250i... the exit roller section makes noise. Sometime on new out of the box devices.
  25. Re: Anyway to stop finisher sorting after each job Konica c308?

    Maybe i don't understand your problem but it seems to me that you need a job merging tool to collect all jobs in one job.
    In one job the printer goes forward and don't have to wait for passing the...
Results 1 to 25 of 205
Page 1 of 9 1 2 3 4