Search:

Type: Posts; User: fshead

Page 1 of 20 1 2 3 4

Search: Search took 0.13 seconds; generated 53 minute(s) ago.

  1. Thread: Ricoh MP C3004

    by fshead
    Replies
    9
    Views
    143

    Re: Ricoh MP C3004

    Thanks.
    MY only concern would be overseas faxes being received from China or somewhere own nite is their day..
  2. Thread: Ricoh MP C3004

    by fshead
    Replies
    9
    Views
    143

    Re: Ricoh MP C3004

    thanks
    can they BRICK a machine if they interrupt the update ie/fax or trying to print etc etc?
  3. Replies
    8
    Views
    135

    Re: MPC 2500 drum/dev unit question

    The unit I pulled out on the mpc2500 looked just like the later models but the fact that i used the mpc2500 unit on the mpc3300/mpc3501 makes me think it will work
  4. Thread: Ricoh MP C3004

    by fshead
    Replies
    9
    Views
    143

    Re: Ricoh MP C3004

    HI as an inde I dont have ricoh site access but was curios with the app update is it customer available or only ricoh techs?
  5. Replies
    8
    Views
    135

    Re: MPC 2500 drum/dev unit question

    thanks.
    i know about the angled corner on the black drum vs the colors and the two pin swap.
    I have bought new B224-2042 drum to use on later models but I cant remember if they needed modding to...
  6. Replies
    8
    Views
    135

    MPC 2500 drum/dev unit question

    hi
    I never seen these in the field and just dropped off a mpc300 where the account
    had a mpc2500 with cq banding only in color..
    They want to donate it to their if i can fix it cheap.
    It looks...
  7. Replies
    10
    Views
    540

    Re: Ricoh MP6001 Dark Band

    if it is happening on print then not the scanner rails..
    I always pull the drum unit,clean the charge unit,wire,grid etc and then clean
    the mylar under the cleaning bush and sensor"which i pull...
  8. Replies
    7
    Views
    266

    Re: c7200 Toner in C7100

    I muck around with crossing over toners but have not done the c7100/c7200 series yet.
    I always check are the drums the same?
    developer and fuser unit about the same design.
    Sometimes ricoh will...
  9. Replies
    19
    Views
    1,639

    Re: jam 056 on mp6002

    so
    i visited this mp6002 and seems no jamming since my previous visit and yes the copier,"not radf" had history of 42 COPIER jams 057..
    I cked the duplex part and they basically only run the tandem...
  10. Replies
    6
    Views
    422

    Re: 5210 ADF Adjustment

    That feeder is the same as the mpc300/mpc401 and it is a little cheap with the hinge design..
    I always find if i close the lid i can always see there is always some play..
    Like you I fudge settings...
  11. Replies
    6
    Views
    422

    Re: 5210 ADF Adjustment

    I had issues wth a that series on a guy who did all double sided scanning.
    I ended up cleaning all rollers wth wd 40 especially thes that release when you open the lid..they get real dirty and the...
  12. [Misc] Re: Toner empty message on new or nearly new black toner Lanier LD 525c

    you can interchange mpc2050 into a mpc2051,all the same toner wth a small tab nr rfid chip that you snap off.
  13. [Misc] Re: Toner empty message on new or nearly new black toner Lanier LD 525c

    i will say if you are using these DO IT WISER toners they cheat you on toner,1/2 of what weight should be inside..
    i think there is suppose to be 210 gr of toner inside and shell adds 80 to...
  14. Re: selling my business and my home you can take over my life

    good luck
    out of curiosity where are you moving to that has better climate?
  15. [Misc] Re: Ricoh Aficio MP C2051 Thick Paper 3 color settings

    ALSO how does the fuser look?
    I actually still use a mpc2030 and outside of the crappy right door plastics I liked this series...
    I cant say how well it will do 100lb but i have a few accounts...
  16. [Misc] Re: Ricoh Aficio MP C2051 Thick Paper 3 color settings

    [QUOTE=wisemendistillery;850335]Long time lurker throughout the years, first time poster!

    I have been trying to print on some 100lb linen textured paper. The texture is very light. Everything...
  17. Replies
    10
    Views
    1,328

    Re: RICOH C3502 wierd printing problem

    AT 1800 US DOLLARS ID hit him with a chulapa for not getting it working right...
    PLUS I dont have my accounts run calibration nor FW updates...
    I D insist he come back and use his experience...
  18. Replies
    19
    Views
    1,639

    Re: jam 056 on mp6002

    THANKS
    I think both were in the lower digits....
    Anybody willing to email me the FW?
    I had asked in the proper location and have not seen any offers.
  19. Thread: SP C231SF

    by fshead
    Replies
    8
    Views
    681

    Re: SP C231SF

    i agree menu sucks but it is a limited use color all in one...
    I had issues wth someone wanting to do duplex with all kinds of options..
    I pulled it and ate the difference and gave him a mpc305 and...
  20. Re: Feasibility of old Analog Copiers for non-profits, clubs, churches, low/no budget

    AS I ve been selling used machines for 35 years this is what I see.
    If I get an account and the machine is more than 6 years old I try to upgrade them.
    If they need small common parts I will repair...
  21. Replies
    19
    Views
    1,639

    Re: jam 056 on mp6002

    I dont know if it is jamming or not at this point..will go there tuesday..
    Does anyone know what the latest FW for engine and system?
  22. Replies
    19
    Views
    1,639

    Re: jam 056 on mp6002

    I am starting to think maybe I will need to do a full FW update?
  23. Replies
    12
    Views
    1,043

    Re: How to empty toner waste bottle on MP C300

    WHEN I had a bunch of the mpc300/mpc401 machines getting ready to go be sold and seemed all had full waste boxes.

    So I took a 1 1/4 hole saw and drilled slowly on the lower "fat" corner.
    Once cut...
  24. Replies
    3
    Views
    388

    Re: MPC 3000-paper problem

    open a fresh ream 1st and try that..
    If it is getting moist from sitting try to see if you can add a tray heater..
  25. Thread: SP C231SF

    by fshead
    Replies
    8
    Views
    681

    Re: SP C231SF

    i dont buy many new parts anyway and keep a stock of working pulls "LABELED" wth meter and use them.
    Most customer would be happy paying half for a good working pull.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4