Search:

No, Phil, I do not believe the world is flat, personally I do not give a crap, if it is round or flat. However, one always should logically question how they get their high tech flying contraption...

Is this the same organization that makes it sound and look like we have actually landed on the moon and have explored other planetary objects in outer space?

Do you have printing preferences in the Mac driver? I can't recall. I know when this problem happens in the pcl6 driver I can go into printing preferences and change print mode from high quality to...

You say "Just thew C1-01again," is this the reason you replaced process frame because of the C1-01 code? Check out this link:
MX-6240, 7040 (Polaris) with error code C1-0X (various charger cleaner...

Copier Addict just offered you a solution to your problem! Now you ask him for the TSB? How about thanking him and trying what he has suggested! ... After all it was just Thanksgiving here in the USA.

You mention you have cleaned the transfer unit sensors, have you replaced the transfer unit sensors with new ones? Have you pulled out the toner pipes and made sure they are the updated ones? The...

The Last firmware update from sharp was over 5 years ago on this model...they no longer support it or are providing updates for it, the model is now about 11 years old and will never be smbv2 or...

MX-3640 unable to access network settings Does this help?

Yes, first thing I did was swap out fuser. The power supply fixed the issue.

I think that applies to the 4551ci as well. The one I replaced was an "old style" and was replaced with the "old style"

Thanks for the info. When I replaced the power supply today, I cleaned all the fans as well.

Most often used 22-6, 24-1 and 64-1,5 if no calibration needed or error codes need to be reset.

What turned out to be fix? Was it the cables? I'm looking for bulletin 2N9-005 (looked on copystar portal and can not locate it) the reason I ask is I currently have a TA 455ci with this code and...

Thank you for all your help! it turns out that I had made a mistake with the IP octet the prior visits. It was on a 192.168.1.10.111 as opposed to my 192.168.1.1.111. It took a second look at it...

We have used dialectric grease on some drum shafts to correct drum shorting issues on the old Alfard series.

Thank you, Mansart. The actual IP the is set to the copier is 192.168.1.111, the network operates on a 192.168.0 octet, I was just using the 192.168.1.1 as an example. I will use what you have given...

I haven't tried that, Zootech, but I will give it a try.

Thanks, Spanky. The issue I am having logging into the webpage is the IP address of the copier has been changed, they are on a 192.168.0.1, but it has been changed to 192.168.1.1, so it will not...

I just installed a new SD card and a new hdd and the mfp is still in the same condition. I may order the mfpc board and see if that resolves the issue.

Wow, interesting issue. I am assuming being it is dusty you cleaned all boards, etc. I want to say laser unit issue because of the reversing but maybe try another drum/developing unit and transfer...

LOL..yes, no different, at that piont I am able to just change the machine name etc., I can not access the network settings.

Thanks guys, I will try logging in on the webpage with the ip address given to the mfp. The client is on a 192.168.0.1, apparently the IT person changed the ip to 192.168.1.1. I am on my way back to...

yes, I am able to get into all sim modes as well as admin mode. I did perform a 67-17, but to no avail.

43951 No go Sam, I do not have access to security settings. This is all I get when I...

Have you rechecked all your connections? It almost looks like a short