Search:

Type: Posts; User: emujo2

Page 1 of 20 1 2 3 4

Search: Search took 0.13 seconds.

  1. Replies
    14
    Views
    286

    Re: Konica c284 copies with problems

    PCQ can be caused by electronics..Scanner and printer boards can contribute..However, the fact that he wants us to help him based on PDFs that, according to him, don't show the problem, is what I...
  2. Replies
    8
    Views
    389

    Re: Counter of each paper cassette

    Correct, Serv mode would give you counts based on paper fed from drawer, while customer counters would show size of paper printed and this could include any drawer that was set for that size.
  3. Replies
    11
    Views
    203

    Re: Konica c352 fax issue

    My guess is the other fax device is using VOIP, and the incoming configuration is missing something. You could try and set the C352 fax up to conform with a VOIP or digital line. There are quite a...
  4. Replies
    20
    Views
    799

    Re: Shady Konica Bizhub seller

    Everyone of these consumables has a life limit. All of us know that some consumables will go well past this limit w/o any noticeable adverse affects so many of the vendors put in software to allow...
  5. Re: auto delete documents in userbox after printing

    I have not seen the LK 110 v2 in use, but I have gone through the settings. I would have thought that any admin settings applied to user boxes would be applied to an Email RX sent to the user box. As...
  6. Replies
    20
    Views
    799

    Re: Shady Konica Bizhub seller

    If the seller says "your consumables are new", but only re chipped them I think he has a legit gripe..If the machine was sold "as is" then he's out of luck..But, if it was me, I would be making a...
  7. Re: Konica Minolta C3351 Change Paper Size Settings

    46142

    This is applicable to all trays per the serv manual, not just tray 1. E
  8. Replies
    5
    Views
    188

    Re: Develop 284E Konica minolta C284

    This guy has more red cards than anyone I've seen..Who did he piss off and why? Looks like he contributes nothing (not speaking of money). E
  9. Replies
    3
    Views
    189

    Re: Biz 364e security

    This has been answered mulitilpe times on the forum..There are other settings that can remove this feature. Search for "direct input" before you start doing an all data clear. E
  10. Replies
    20
    Views
    799

    Re: Shady Konica Bizhub seller

    You know, the fact that he went back to the same company and paid another 600 pounds is pretty telling in itself..Fool me once shame on you....
  11. Replies
    20
    Views
    799

    Re: Shady Konica Bizhub seller

    I know we talked about this in another thread...may be the same poster..When these machines come back off a 3-5 year lease, they are nothing more than junk to the vendors, a small pecentage may be...
  12. Replies
    15
    Views
    351

    Re: DF 617 on Bizhub C360 do not work

    Might be a wild guess, but does the firmware for the DF match the version of the machine? Also in some instances accessories after a certain s/n could not be used on earlier versions of the model. I...
  13. Replies
    20
    Views
    799

    Re: Shady Konica Bizhub seller

    If they re chipped them, the consumables would be showing 100% - whatever you have run. That being said, re chipping does nothing other than lying to the machine and saying "you have a new...
  14. Thread: Please Help

    by emujo2
    Replies
    11
    Views
    275

    [Error Code] Re: Please Help

    And the 601 did not use the IH system. E
  15. Thread: C4050i offline

    by emujo2
    Replies
    5
    Views
    231

    Re: C4050i offline

    Printers going offline has been an issue on KM products for a long time, but if you are getting other network failures at the same time I would suspect a network issue as the culprit rather than the...
  16. Replies
    6
    Views
    183

    Re: 1FFF Trouble Intern

    I have been dealing with this code in my demo room..After days of trouble shooting and monitoring, I finally made a connection to the FFF errors with an instantaneous re boot. We had a bad surge...
  17. Replies
    4
    Views
    228

    Re: bizhub c308, c368 Reset Tool

    Agree 100%..and not just because the data is proprietary KM, but using the reset tool is not for just any situation. You can very easily wind up with a brick. E
  18. Replies
    2
    Views
    176

    [Misc] 4050 LCD screen freezing

    4050, latest f/w never been on the network (standalone copier). LDC icons are unresponsive after an indefinite time of sitting idle. hard buttons always works and LCD responds to the presance of your...
  19. Replies
    18
    Views
    742

    Re: C654 network port issue.

    The NIC is protected against surges. if it took a hit you would see symptoms like this..Once an active cable is plugged in you should see activity regardless is actual communicaiton is happening. If...
  20. Replies
    4
    Views
    194

    Re: Change electronic components & iOptions

    I options can be lost for any number of reasons..It's always a good idea to keep a copy of the activation token as needed, but if you have access to LMS you can get that info at any time. The biggest...
  21. Re: How to print a multiple page sized PDF document

    Where do I send the bill???
  22. Re: How to print a multiple page sized PDF document

    I think you are missing something..

    The option to have everything print on 1 size is the check box above this..If you choose print by PDF page size it will pull from each tray based on the size of...
  23. Re: How to print a multiple page sized PDF document

    Geez, now were teaching basic PDF usage...You know this isn't a KonicaMinolta problem???
    ...
  24. Replies
    7
    Views
    242

    [Misc] Re: Bizhub C458 + Driver for ARM64 Tablet

    You could also give the XPS driver a shot. This is more of a Microsoft flavored driver. E
  25. Re: Konica minolta c224e showing OCR dictionary not found

    If you were getting that message then in most cases you would have had the optional OCR LK installed. You may have a customer wondering why they can no longer OCR their scans. I would have been...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4