Search:

Type: Posts; User: ntbann

Page 1 of 19 1 2 3 4

Search: Search took 0.04 seconds.

  1. Re: I need the lasted firmware for the Kyocera 3500i thru 5500i & 3050ci thru 5550ci

    I agree on the make things harder point. When is Kyocera going to get away from internet explorer to look up bulletins?
  2. Re: I need the lasted firmware for the Kyocera 3500i thru 5500i & 3050ci thru 5550ci

    Its on the web site. Latest version is 12.03.
  3. Replies
    10
    Views
    392

    [Electrical] Re: Ar 6020 scanner and printer disconnected

    Banging my head on my desk! Sometimes I wonder why I try!
  4. Thread: ecosys 3640mfp

    by ntbann
    Replies
    4
    Views
    207

    Re: ecosys 3640mfp

    These take a long time to fill the DV unit. Did you let it run or did you turn it off after a while?
  5. Replies
    10
    Views
    392

    [Electrical] Re: Ar 6020 scanner and printer disconnected

    Can you ping it? Sounds like the NIC is blown.
  6. Replies
    2
    Views
    175

    [Error Code] Re: Ar m256 E1-88 IMC time out

    The last firmware released was 2014. These machines need to be connected with a serial cable to a PC. Most PCs dont have them anymore. You will also need the update software from sharp. I havent had...
  7. Replies
    12
    Views
    458

    [Misc] Re: M5526 and scan to email failure

    Did you try the ip address for mail.smtp2go.com? You may have a dns issue.
  8. [Misc] Re: TA 5501 Fax with voip connection not working reliably

    When I have A customer using a 4 wire phone line. I peel the outside coating back and cut the yellow and black wires.
  9. Re: Where do you find older firmware on the new website?

    I just looked and TA2552ci is on the new site.
  10. Replies
    25
    Views
    13,005

    Re: P6035cdn Load Cassette 1 message

    No they have not changed them and they are cheep plastic.
  11. Thread: Reset

    by ntbann
    Replies
    6
    Views
    373

    Re: Reset

    3500 3500 is correct for a 6535
  12. Replies
    2
    Views
    293

    Re: Sharp MX-M260 Need Document Feeder

    we have drilled a hole through the frame and hinge and attach with a long screw.
  13. Replies
    25
    Views
    13,005

    Re: P6035cdn Load Cassette 1 message

    The M's do it as well. Had to replace bent flags on them also.
  14. Replies
    9
    Views
    448

    [Electrical] Re: Riso MZ790 - Master Removal Malfunction

    I had one once that the drum drive gear screws loosened up in the drive pack (back of the machine) causing master removal problems. Had to use the alignment pins to retime drive and tighten screws...
  15. Replies
    9
    Views
    448

    [Electrical] Re: Riso MZ790 - Master Removal Malfunction

    Are the masters wadding up at the disposal box entrance? If so you may have a drum alignment issue.
  16. Replies
    10
    Views
    1,241

    [Error Code] Re: Sharp AR-M550u Error F2 only

    I heard that somewhere?
  17. Replies
    10
    Views
    1,241

    [Error Code] Re: Sharp AR-M550u Error F2 only

    No F2-49 on this machine but on others it is a LSU thermistor error. Maybe a bad laser?
  18. Replies
    8
    Views
    570

    [CQ] Re: TaskAlfa 308ci Eats Drums.

    Drums don't touch the media in this machine.
  19. Replies
    6
    Views
    372

    Re: Kyocera Job Accounting - Import / Export

    You can pull a 917 through KFS. Just have to get the customer to hit yes on copier.
  20. Re: Kyocera Ecosys P2135dn / P2040dn Status Page Shortcut

    !R! elog; stat; stat1; page; exit; Save this string in note pad as a .capt file and save it to a jump drive. Plug int machine and print the file.
  21. Re: Kyocera P6130cdn- "Cassette 1 Not Loaded" Message

    Flip the machine on its back. There is a long white flag that drops that get bent out of shape. You will see a stress mark in the plastic. I usually heat it up with a lighter and bend it back if its...
  22. Re: Kyocera 8001i "The Power Cable is Unlplugged" msg

    I would make the customer put in 20amp.
  23. Replies
    12
    Views
    497

    [Misc] Re: Kyocera M3040idn printing problem

    I wouldn't use cleaner on charge rollers. It can dissolve the outer coating making tor roller junk. Strait water works the best.
  24. Replies
    8
    Views
    643

    Re: L4-16 code on a MX4141N

    Yes they are separate.
  25. Replies
    5
    Views
    378

    Re: Mxm7570 keyboard wrong characters

    Sounds like the display got hit with disinfectant. Have you tried to clean key contacts?
Results 1 to 25 of 461
Page 1 of 19 1 2 3 4