Search:

Type: Posts; User: Demon33

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    24
    Views
    2,782

    Re: MX-4070 fax issue

    Known issue with sharp models.

    Change the setting in SIM 66-1, soft switch 114, bit 8 to 0 instead of 1.

    Be aware that the EXTERNAL LINE CONNECTOR on the machine can't be used after this...
  2. Thread: sharp mx3050n

    by Demon33
    Replies
    13
    Views
    1,146

    Re: sharp mx3050n

    Are you able to get into simulation ?

    If not as said before , hit the switch near the usb/network connector and do a firmware upgrade from usb .

    I have a lot of those on the road & I would try...
  3. Re: Sharp MX-6070v machine unable to print and photocopy

    My guess is that your hdd has a problem. The user login/codes are stored on the hdd.
    I usually configure a default user in black/white that auto-log at boot so the client just have to entre a code...
  4. Replies
    3
    Views
    466

    [CQ] Re: MX2640 missing image areas

    Have you tried to change the primary belt unit ?

    I had this once and it was the bushing of the first transfer roller inside the belt. White plastic holder was missing a pin that is holding the...
  5. Replies
    10
    Views
    937

    Re: MX-B350P MX-B450P AirPrint

    see screenshot
  6. Replies
    2
    Views
    667

    Re: Sharp MX-4061 with U6-00

    I have a similar issue with a mx-4070n with a mx-de27.
    Getting u6-01 & u6-02.
    Got it working after a complete reset, sold the machine, customer called during the first week.
    Changed the desk...
  7. Replies
    10
    Views
    937

    Re: MX-B350P MX-B450P AirPrint

    We had a lot of trouble with that.
    Worked at first then stopped working after couple of weeks.
    Sharp finally fixed the firmware.

    In North-America the firmware is not on the sharp website. You...
  8. Thread: Sharp mxm 654N

    by Demon33
    Replies
    6
    Views
    619

    Re: Sharp mxm 654N

    Had this once , the hp was running on compatible toner & they made copy of those pages in the MFP. Causing the document feeder black toner dust.
  9. Replies
    5
    Views
    563

    [Misc] Re: Mx-3070N Beeping

    Thanks everyone for the help.

    I have found a "wave ID" card reader inside the machine that was making the beep.

    Good to know!
  10. Replies
    5
    Views
    563

    [Misc] Re: Mx-3070N Beeping

    Thanks for the reply :)
    I tried to turn off the sounds in admin but it don't change anything for the beep.
    As for the speaker , I will try to find out where it's comming from. I have no idea where...
  11. Replies
    5
    Views
    563

    [Misc] Mx-3070N Beeping

    Hi,
    I have an MX-3070N that we bought used. It makes a little beep when I turn on the main switch, when I turn on the switch on the operation panel & when it comes out of sleep. Occasionally we...
  12. Thread: M453N indents

    by Demon33
    Replies
    9
    Views
    1,809

    Re: M453N indents

    Have you tried to change the pressure position on the fuser to "envelope" just to see if it change anything ? That would confirm a fuser related problem .

    The registration spring is a good...
  13. Thread: Sharp MX -5070

    by Demon33
    Replies
    11
    Views
    3,853

    Re: Sharp MX -5070

    I had the same problem on a MX-M3071 , there is no maintenance code it say " (maintenance : )"

    I solved it by firmware update

    Good luck
  14. Replies
    6
    Views
    605

    Re: Replacing developer MX-4141

    like said before , take out black toner. (the machine refuse to calibrate DV with the toner in it)

    do 25-01 select bk + execute.
  15. Replies
    11
    Views
    1,790

    Re: mx-m565n Cleaning blade flip

    I'm defenetly goin to test that. The idea look crazy but what the hell.

    Thanks
  16. Thread: F2-78 MXM565

    by Demon33
    Replies
    15
    Views
    15,823

    Re: F2-78 MXM565

    you can also check in 44-09 if the values are good.

    If not clean the transfert roller with dry cloth , the sensor & do a 46-74 again.
  17. Replies
    11
    Views
    1,790

    mx-m565n Cleaning blade flip

    I have a lot of cleaning blade flipping after doing a PM on those model & I saw a tech bulletin that say you have to put stearic acid powder on the drum when replacing it . I never did that on any...
  18. Replies
    18
    Views
    2,831

    [Jamming] Re: MX-3640N Random jam & reeboot

    problem is solved since the power supply was changed .

    Thanks again everyone
  19. Replies
    18
    Views
    2,831

    [Jamming] Re: MX-3640N Random jam & reeboot

    I'm sorry but I don't understand
    the machine firmware are :0 6.00.a2 with the tls 1.2 patch
  20. Replies
    18
    Views
    2,831

    [Jamming] Re: MX-3640N Random jam & reeboot

    Had a call this mornig the machine was dead . Only got the green led on the panel to flash & the screen was blinking.

    I will let you know if the jam/reboot still happens in the next days.

    Thank...
  21. Replies
    18
    Views
    2,831

    [Jamming] Re: MX-3640N Random jam & reeboot

    I had that in mind but a couple of days back, they told me they tried printing a document about 4 times & it just reboot all the time.
    So I asked to print it again while I was there but no luck it...
  22. Replies
    18
    Views
    2,831

    [Jamming] Re: MX-3640N Random jam & reeboot

    Hard to say if it reboot first or after the jam.
    I never saw the trouble while in front of the machine, only once I was leaving & the said not to leave it just jam.
    Went back to the machine to...
  23. Replies
    18
    Views
    2,831

    [Jamming] Re: MX-3640N Random jam & reeboot

    The machine as 3 different type of paper in 3 different trays & the all jam randomly.
    I'm not shure what you mean by "the box" but the copier as about 80k bw & 40 k color.
    The firmware is on the...
  24. Replies
    18
    Views
    2,831

    [Jamming] Re: MX-3640N Random jam & reeboot

    The machine reboot by itself ,it's not the customer rebooting.
    Usually I can test the faulty sensors in simulation & find the faulty path sensors.
    The machine reboot when the jam occur so that...
  25. Replies
    18
    Views
    2,831

    [Jamming] MX-3640N Random jam & reeboot

    The machine as about 80k BW 40k color print / copies
    fax
    inner finisher

    It does Random jam from any tray with 2 letter tray and 1 legal .
    The worst part of it (besides not doing it while I'm...
Results 1 to 25 of 32
Page 1 of 2 1 2