Search:

Type: Posts; User: occus

Page 1 of 9 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    36
    Views
    1,155

    Re: C3320i and fan noise, even in sleep mode

    I wrote to change the fan is not the solution. :)
  2. Replies
    36
    Views
    1,155

    Re: C3320i and fan noise, even in sleep mode

    In my case the fan stops in deep standby with default of the box settings. It is only a problem in a silent enviroment and the customer is sitting near the device.
    I have changed the fan with a cpu...
  3. Replies
    36
    Views
    1,155

    Re: C3320i and fan noise, even in sleep mode

    Yes it is true this series 3320i/3350i/4050i have a noisy fan for the cpu. I asked KM if there was a solution, but there wasn't one.
  4. Replies
    5
    Views
    402

    Re: Bizhub c250i squeaking noise

    Check other posts here and the paper exit drive
  5. Re: konica minolta c360i tray one jam code 1105 also internal error erratic code

    A tech tells me from this paperjam 1 tray problem on a new i machine... he has changed the whole pickup and the clutch cl10 but it was not the solution.
    Special thing the machine makes a cleaning...
  6. Replies
    6
    Views
    504

    Re: i series color vs E series color

    And don't forgett to make the gradation adjustment after change the switch! if you want see any change...
  7. Replies
    10
    Views
    669

    Re: C250i tick tick tick at idle demo and cause

    The space that i have fixed is not in relation with any other gear then the metal motor gear so i can't imaging, there is no reason not to try this modification.
    Last friday i found out if you press...
  8. Replies
    10
    Views
    669

    Re: C250i tick tick tick at idle demo and cause

    After a test of 3'000 papers in testmode the drive gear is still silent.

    If you look at the detail metall motor gear and spaced plastik gear, this picture is before i put in the washers

    48471
    ...
  9. Replies
    10
    Views
    669

    Re: C250i tick tick tick at idle demo and cause

    Ok, its done...
    Do not replace with a new drive gear. In my case i made a modification.
    If you make it for the first time calculate with 60min its really tight. And after i think you need about...
  10. Replies
    10
    Views
    669

    Re: C250i tick tick tick at idle demo and cause

    @EarthKmTech

    Do you have a solution?
    I have replaced the drive gear assembly but the ticking sound is still there... now a bit louder whit the new one...
  11. Replies
    4
    Views
    296

    Re: iSeries drum life

    I've already seen both. Drum black with 180k and with 60k for replacement (bizhub c250i)
  12. Re: Broken C250i operator panel + paper exit noise

    Tick tick tick... i know it... have already ordered a fusing drive assembly for monday.

    @EarthKmTech how long does it take for exchange?
    (edit: sorry i saw your separat thread to late)
  13. Re: Broken C250i operator panel + paper exit noise

    Hi Bix

    I told you the last time it comes from the exit drive... but of course everything ist possible. Had a lot of this squeeking machines...
    Open the side door and remove the small belt from...
  14. Replies
    26
    Views
    871

    Re: Reboot Olivetti d-Color MF282plus

    48215
    48214

    Bix, do you have a new SSD with green Dot? (with 6.05 already installed?)
    Have a look in the troubleshooting guide.

    If you can't install the firmware i think it is not possible to...
  15. Replies
    26
    Views
    871

    Re: Reboot Olivetti d-Color MF282plus

    Was it possible to load a firmware after replacement? Try reseat SSD.
  16. Replies
    26
    Views
    871

    Re: Reboot Olivetti d-Color MF282plus

    Yes, plus means (e)nhanced.
    Try the KM fimware, but it happened once that it didn't work, it depends on the firmware version. Then software switch 10 from 04(generic Brand) to 01(KM)
  17. Re: Bizhub c224e problem "Serial number must be entered" -> "TPM Chip has been change

    I know there is a firmware GHV-M1 to fix that problem (DLBT1810973EN_0)

    The following issues are solved in this firmware.



    After turning OFF/ON the Main Power, the entry screen of serial...
  18. Replies
    26
    Views
    871

    Re: Reboot Olivetti d-Color MF282plus

    No, you can use a old one!
    Replace and put in usbstick with newest firmware on first boot. Most time it works, sometimes you need a clear all data.
  19. Replies
    26
    Views
    871

    Re: Reboot Olivetti d-Color MF282plus

    Yes, change the SSD. I replaced a few last year, even with the controller firmware fix installed...
    Sometimes you need a total clear and Moviedata after replacing it, if you get a SSD error.
  20. Replies
    13
    Views
    1,085

    Re: Bizhub C250i Fuser noise

    Yes, i had this several times on 250i... the exit roller section makes noise. Sometime on new out of the box devices.
  21. Re: Anyway to stop finisher sorting after each job Konica c308?

    Maybe i don't understand your problem but it seems to me that you need a job merging tool to collect all jobs in one job.
    In one job the printer goes forward and don't have to wait for passing the...
  22. Replies
    3
    Views
    292

    [Misc] Re: Bizhub FW update general question

    I have updatet once for a test with ftp. You store the adress in the bizhub and in your webspace you can change the files to the newer one.
    After you can update manual in customer enviroment without...
  23. Re: Anyone else getting crystallized/hardened toners from KM

    Same... one time one bottle since 10 years. Maybe 2 years ago.
  24. Replies
    45
    Views
    4,349

    Re: We comment on iSeries firmware

    Ok the test ist over, since the G00-B5 Firmware i have no more problems awakening from standby trough a button press or a print job. We have 3x c250i on different customers and no calls until today....
  25. Re: firmawre compatibility between minolta and olivetti?

    It works not always.

    I had a Develop ineo+454e (bizhub c454e) which the new firmware did not accept.... every time it boots to normal copy ready state.
    Only afterwards did I see that only the...
Results 1 to 25 of 201
Page 1 of 9 1 2 3 4